QUINT 2-INPUT XOR/XNOR GATE

Description The MC10E/100E107 is a quint 2-input XOR/XNOR gate. The function output F is the OR of all five XOR outputs, while F is the NOR. The Q outputs need not be terminated if only the F outputs are to be used. The 100 Series contains temperature compensation. Features ? 600 ps Maximum Pr

文件：102.71 Kbytes 頁數：4 Pages

ONSEMI

安森美半導體

1:9 DIFFERENTIAL CLOCK DRIVER

Description The MC10E/100E111 is a low skew 1-to-9 differential driver, designed with clock distribution in mind. It accepts one signal input, which can be either differential or else single-ended if the VBB output is used. The signal is fanned out to 9 identical differential outputs. An enable i

文件：104.69 Kbytes 頁數：5 Pages

ONSEMI

安森美半導體

QUAD DRIVER

Description The MC10E/100E112 is a quad driver with two pairs of OR/NOR outputs from each gate, and a common, buffered enable input. Using the data inputs the device can serve as an ECL memory address fan-out driver. Using just the enable input, the device serves as a clock driver, although the M

文件：99.66 Kbytes 頁數：4 Pages

ONSEMI

安森美半導體

QUINT DIFFERENTIAL LINE RECEIVER

Description The MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. For applications which require bandwidths greater than that of the E116, the E416 device may be of interest. Active current sources plus a deep collector feature of the MOSAIC III process provide t

文件：108 Kbytes 頁數：4 Pages

ONSEMI

安森美半導體

9-BIT BUFFER

Description The MC10E/100E122 is a 9-bit buffer. The device contains nine non-inverting buffer gates. The 100 Series contains temperature compensation. Features ? 500 ps Max. Propagation Delay ? PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V ? NECL Mode Operating Range: VCC =

文件：94.29 Kbytes 頁數：4 Pages

ONSEMI

安森美半導體

4-BIT D FLIP-FLOP

Description The MC10E/100E131 is a quad master-slave D-type flip-flop with differential outputs. Each flip-flop may be clocked separately by holding Common Clock (CC) LOW and using the Clock Enable (CE) inputs for clocking. Common clocking is achieved by holding the CE inputs LOW and using CC to

文件：104.62 Kbytes 頁數：4 Pages

ONSEMI

安森美半導體

6-BIT UNIVERSAL UP/DOWN COUNTER

Description The MC10E/100E136 is a 6-bit synchronous, presettable, cascadable universal counter. The device generates a look-ahead-carry output and accepts a look-ahead-carry input. These two features allow for the cascading of multiple E136’s for wider bit width counters that operate at very nea

文件：172.06 Kbytes 頁數：9 Pages

ONSEMI

安森美半導體

8-BIT RIPPLE COUNTER

Description The MC10E/100E137 is a very high speed binary ripple counter. The two least significant bits were designed with very fast edge rates while the more significant bits maintain standard ECLinPS? output edge rates. This allows the counter to operate at very high frequencies while maintain

文件：117.44 Kbytes 頁數：5 Pages

ONSEMI

安森美半導體

8-BIT SHIFT REGISTER

Description The MC10E/100E141 is an 8-bit full-function shift register. The E141 performs serial/parallel in and serial/parallel out, shifting in either direction. The eight inputs D0 ? D7 accept parallel input data, while DL/DR accept serial input data for left/right shifting. The Qn outputs do

文件：111.42 Kbytes 頁數：4 Pages

ONSEMI

安森美半導體

9-BIT SHIFT REGISTER

Description The MC10E/100E142 is a 9-bit shift register, designed with byte-parity applications in mind. The E142 performs serial/parallel in and serial/parallel out, shifting in one direction. The nine inputs D0 ? D8 accept parallel input data, while S-IN accepts serial input data. The Qn output

文件：109.05 Kbytes 頁數：4 Pages

ONSEMI

安森美半導體