TLE4998S8D中文資料XENSIV ? - TLE4998S8D 線性霍爾傳感器，用于高精度角度和位置檢測數據手冊Infineon規格書

描述 Description

The linear Hall IC TLE4998S8D has been designed specifically to meet the requirements of highly accurate angle and position detection. The sensor provides a digital SENT signal based on the SAE J2716 standard, which consists of a sequence of pulses. Each transmission consists of multiple data nibbles containing the Hall value, the temperature and status information of the sensor. The output stage is an open-drain driver pulling the output pin to low only. Therefore, the high level needs to be obtained by an external pull-up resistor. This output type has the advantage that the receiver may use an even lower supply voltage (e.g. 3.3 V). In this case the pull-up resistor must be connected to the given receiver supply.

特性 Features

? Integration of two individual Linear Hall sensor IC’s with Single Edge Nibble Transmission (SENT) open-drain
? output signal (SAE J2716)
? 20-bit Digital Signal Processing (DSP)
? Digital temperature and stress compensation
? 16-bit overall resolution
? Operating automotive temperature range -40°C to 125°C
? Minimal drift of output signal over temperature and lifetime
? Programmable parameters stored in EEPROM with single-bit error correction:
? SENT unit time
? Magnetic range, sensitivity (gain), offset, and polarity of the output slope
? Filter Bandwidth
? Clamping levels
? Customer temperature compensation coefficients for all common magnets

? Re-programmable until memory lock
? Supply voltage 4.5-5.5 V (4.1-16 V extended range)
? Configurable magnetic range: ±50 mT, ±100 mT, or ±200 mT
? Reverse-polarity and overvoltage protection for all pins
? Output short-circuit protection
? On-board diagnostics (overvoltage, EEPROM error)
? Output of internal magnetic field values and temperature
? Programming and operation of multiple sensors with common power supply
? Two-point calibration of magnetic transfer function without iteration steps



優勢:

應用 Application

? Robust replacement of potentiometers: No mechanical abrasion, resistant to humidity, temperature, pollution and vibration
? Linear and angular position sensing in automotive and industrial applications with highest accuracy requirements
? Suited for safety applications such as pedal position, throttle position and steering torque sensing

簡介

TLE4998S8D屬于傳感器變送器的磁性傳感器-開關（固態）。由Infineon制造生產的TLE4998S8D磁性傳感器 - 開關（固態）該系列產品使用固態技術來檢測是否存在超過某個特定幅度和/或標示的磁場，并提供指示是否存在此類磁場的雙態輸出。它們與磁簧開關以及線性或羅盤型固態器件不同，前者通過使用移動機械部件來提供類似的功能，后者提供指示所施加磁場的強度和/或方向的可變輸出。