TLE4998C8D中文資料Linear Hall IC featuring two-point calibration of magnetic transfer function without iteration steps數據手冊Infineon規格書

描述 Description

The linear Hall IC TLE4998C8D has been designed specifically to meet the requirements of highly accurate angle and position detection. The sensor provides a digital SPC (Short PWM Code) signal, based on the standardized SENT (Single Edge Nibble Transmission, SAE J2716) protocol. The SPC protocol allows transmissions initiated by the ECU.
Two further operation modes are available:

? “range selection” for dynamically switching of the measurement range during operation

? “ID selection” to build a bus system with up to 4 IC’s on a single output line and a common supply, which can be individually accessed by the ECU.

特性 Features

? Integration of two individual programmable Linear Hall sensor IC’s with SPC (Short PWM Code) protocol with enhanced interface features based on SENT (Single Edge Nibble Transmission, defined by SAE J2716)
? 20-bit Digital Signal Processing (DSP)
? Digital temperature and stress compensation
? 16-bit overall resolution
? Operating automotive temperature range -40°C to 125°C
? Minimal drift of output signal over temperature and lifetime
? Programmable parameters stored in EEPROM with single-bit error correction:
? SPC protocol modes: synchronous transmission, dynamic range selection, ID selection mode
? Magnetic range, sensitivity (gain), offset, and polarity of the output slope
? Bandwidth
? Clamping levels
? Customer temperature compensation coefficients for all common magnets

? Re-programmable until memory lock
? Supply voltage 4.5-5.5 V (4.1-16 V extended range)
? Configurable magnetic range: ±50 mT, ±100 mT, or ±200 mT
? Reverse-polarity and overvoltage protection for all pins
? Output short-circuit protection
? On-board diagnostics (overvoltage, EEPROM error)
? Output of internal magnetic field values and temperature
? Programming and operation of multiple sensors with common power supply
? Two-point calibration of magnetic transfer function without iteration steps



優勢:

應用 Application

? Robust replacement of potentiometers: No mechanical abrasion, resistant to humidity, temperature, pollution and vibration
? Linear and angular position sensing in automotive and industrial applications with highest accuracy requirements
? Suited for safety applications such as pedal position, throttle position and steering torque sensing

簡介

TLE4998C8D屬于傳感器變送器的磁性傳感器-線性羅盤（IC）。由Infineon制造生產的TLE4998C8D磁性傳感器 - 線性，羅盤（IC）該系列產品可用于將磁場強度作為一個可變數量進行測量，而相比之下，類似產品僅檢測是否存在強度超過某個限值的磁場。常見的應用包括測量地球磁場，以類似于傳統羅盤的方式進行定向，市面上的一些器件允許以相對于磁場的物理方向直接讀取測量值。