Integrated Circuit Switching Regulator Control Circuit

Description: The NTE7044 is an integrated circuit in a 9–Lead SIP type package which contains a PWM switching regulator control circuit and protect circuit on a single chip. Features: ? Soft Start Circuit ? 0 to 0.7 Duty ? Protection Circuit for Overvoltage and Current ? Extern

文件：37.74 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Horizontal Signal Processing Circuit for CRT Displays

Features: ? Processing for both Negative and Positive Sync. Signal ? Wide Horizontal Oscillation Frequency Range: 14kHz to 60kHz ? Wide Output Pulse Width Selection: 2μs to 40μs

文件：26.83 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Hybrid Switching Regulator

Integrated Circuit Hybrid Switching Regulator

文件：24.86 Kbytes 頁數：2 Pages

NTE

Integrated Circuit TV Color Small Signal Sub System

Features: ? Vision IF Amplifier with Synchronous Demodulator ? Automatic Gain Control (AGC) Detector Suitable for Negative Modulation ? AGC Tuner ? Automatic Frequency Control (AFC) Circuit with Sample–and–Hold ? Video Preamplifier ? Sound IF Amplifier and Demodulator ? DC Vol

文件：71.35 Kbytes 頁數：8 Pages

NTE

Integrated Circuit NTSC Decoder w/Fast RGB Blanking

Description: The NTE7048 is a monolithic integrated decoder for the NTSC color television standard. This device combines all functions required for the identification and demodulation of NTSC signals ina 20–Lead DIP type package. Furthermore, it contains a luminance amplifier, an RGB–matrix and

文件：43.54 Kbytes 頁數：5 Pages

NTE

Integrated Circuit CMOS-Sync Generator for TV & Video Processing Systems

Description: The NTE7049 is a CMOS LSI sync generator in a 24–Lead DIP type package that produces all the timing signals required to drive a fully 2–to–1 interlaced 525–line 30–frame/second, or 625–line 25–frame/second TV camera or video processing system. A complete sync waveform is produced w

文件：30.18 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Phase Lock Loop (PLL) Stereo Decoder

Description: The NTE7050 is a Phase Lock Loop (PLL) stereo decoder with cassette head amplifiers in a 16–Lead DIP type package designed especially for car radios. This device has SDS circuitry where fluctuating signal strength can cause demodulation noise and distortion. The stereo decoder is c

文件：36.49 Kbytes 頁數：5 Pages

NTE

Integrated Circuit 1W BTL Mono Audio Amplifier

Description: The NTE7051 is a mono output amplifier in a 8–Lead DIP style plastic package designed for use in battery–fed portable audio applications, such as tape recorders and radios. This device uses the Bridge–Tied–Load principle (BTL) which can deliver an output power of 1.2W (THD = 10) in

文件：20.48 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Mono BTL Audio Amplifier, 3W

Description: The NTE7052 is a mono output amplifier in a 9–Lead SIP type package designed for use in battery–fed portable radios and mains–fed equipment such as televisions. This device needs no external components because it makes use of the Bridge–Tied–Load (BTL) principle. Consequently it ha

文件：26.26 Kbytes 頁數：3 Pages

NTE

Integrated Circuit 22W Bridge-Stereo Amplifier for Car Radio

Description: The NTE7053 is an audio power amplifier is a 11–Lead Staggered SIP type package designed for car radio applications. Thanks to the fully complementary PNP/NPN output configuration, the high performance of this device is obtained without bootstrap capacitors. A delay turn–on m

文件：24.46 Kbytes 頁數：3 Pages

NTE