Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: 3 Outputs Output Voltage Select Function

文件：22.3 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Module, 2 Output Positive Voltage Regulator for VCR

Features: 2 Outputs Output Voltage Select Function

文件：22.04 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Module, 5 Output Positive Voltage Regulator for VCR

Features: 5 Outputs Output Voltage Select Function

文件：24.15 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Vertical Deflection Output Circuit w/Drive Circuit for CRT Display

Description: The NTE7039 and NTE7104 are vertical deflection output ICs developed for use in high–grade TVs and displays. The interlace and crossover distortion responses, in particular, have been greatly im proved, allowing excellent picture quality on large size television screens and h

文件：24.92 Kbytes 頁數：3 Pages

NTE

Linear Integrated Circuit RF−IF Amplifier

Description: The NTE703A is an RF?IF amplifier constructed on a single silicon chip and i intended for use as a limiting or non?limiting amplifier, harmonic mixer, or oscillator to 150MHz. The low internal feedback of the device insures a higher stability?limited gain than that available from c

文件：81.17 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 20W

Features: ? High Output Power: 20W Typ (±B1 = ±22V, RL = 8?, f = 20Hz to 20kHz, THD = 1) 18W Typ (±B1 = ±22V, RL = 8?, f = 20Hz to 20kHz, THD = 0.5) where: ±B1: Supply Voltage, RL: Load Frequency, f: Frequency, THD: Total Harmonic Distortion, ±B2 = 25V constant ? V

文件：28.05 Kbytes 頁數：3 Pages

NTE

Dual, Audio Power Amplifier, 22W BTL

Description: The NTE7041 is an integrated circuit in a 17–Lead SIP type package designed for stereo audio use in car stereo applications. This device has two built–in channels to reduce the characteristic difference between L and R channels. In addition, the NTE7041 contains stand–by and muting

文件：30.14 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Bi-Directional Motor Driver

Description: The NTE7042 is a Bi–Directional Motor Drive in a 9–Lead SIP type package and generates an output current of 700mA (Max) with 4 output modes of forward rotation, reverse rotation, stop (idling), and brake according to input logic (2 inputs). The GNDs of the logic unit and power unit

文件：25.19 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Motor Driver w/4 Modes

Features: ? 4 Modes Available: CW, CCW, STOP, and BRAKE ? Output Current Up to 1A (Average) and 2A (Peak) ? Wide Range of Operating Voltage: VCC opr = 4.5V to 18V VS = 0 to 18V Vref = 0 to 18V ? Built–In Thermal Shutdown, Overcurrent Protector, and Punch–Through Curre

文件：43.98 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Motor Driver w/4 Modes

Features: ? 4 Modes Available: CW, CCW, STOP, and BRAKE ? Output Current Up to 1A (Average) and 2A (Peak) ? Wide Range of Operating Voltage: VCC opr = 4.5V to 18V VS = 0 to 18V Vref = 0 to 18V ? Built–In Thermal Shutdown, Overcurrent Protector, and Punch–Through Curre

文件：43.98 Kbytes 頁數：4 Pages

NTE