Integrated Circuit Audio Power Amp, 2.1W

Features: ? High Power Output at Low Voltage: PO = 2.1W Typ (9V, 4?) ? Low Quiescent Current

文件：81.8 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Dual Audio Power Amp, 5.1W/Ch (10.5W BTL)

Description: The NTE1383 is an integrated circuit in an 18–Lead DIP designed for use as an audio output with low noise, low distortion, and high output for a wide range of power supply voltages and load resistance. Two built–in amplifiers provide dual or BTL operation. Typical applications incl

文件：26.51 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Dual, Audio Power Amplifier, 2.4W/Ch

Features: ? Output Power: POUT = 2.4W/Ch (Typ) at VCC = 14V, RL = 8?, THD = 10 ? Wide Operating Supply Voltage Range: VCC = 5.5V to 20V ? Very Few External Components Required ? Built–In Turn–On “POP” Noise Muting Circuit ? Excellent Crosstalk: CT = –60dB (Typ)

文件：22.94 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 5.8W, for Car Radio, Car Stereo

Features: ? High Gain (52dB. Typ) and High Output (5.8W Typ) ? Soft Clip ? Few External Components ? Built–In Thermal Cutoff Circuit Protects Against Load Short, Overload ? Built–In Pop Noise Prevention Circuit Protects Against Power Supply ON Noise ? May Be Used for Bridge Ampli

文件：23.41 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Dual, Audio Power Amplifier, 20W

Description: the NTE1389 is an audio power amplifier in a 12–Lead SIP type package specifically designed for car stereo applications. Typically, it provides 23W output power at 14.4V and 20W at 13.2V on a 4 Ohm load. This device can be used without capacitors because it incorporates the orig

文件：24.08 Kbytes 頁數：3 Pages

NTE

Zener Diode, 1 Watt ?5 Tolerance

Features: ? Zener Voltage 110V to 200V ? Low Cost ? Low Zener Impedance ? Excellent Clamping ? Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：30.78 Kbytes 頁數：3 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: ? Zener Voltage 110V to 200V ? Low Cost ? Low Zener Impedance ? Excellent Clamping ? Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Audio Power Amplifier, 12W for Car Radio or Car Stereo

Features: ? High Gain: 51dB Typ., HIgh Power Output: 12W Typ. ? Low Number of External Components Required ? Low Noise During Power ON/OFF Operation ? Soft Tonal Quality in Saturated Power Output ? Low Distortion Over Low to High Audio Frequency Range ? Low Residual Noise: Rg = 0

文件：23.48 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Audio Power Amplifier, 12W for Car Radio or Car Stereo

Features: ? High Gain: 51dB Typ., HIgh Power Output: 12W Typ. ? Low Number of External Components Required ? Low Noise During Power ON/OFF Operation ? Soft Tonal Quality in Saturated Power Output ? Low Distortion Over Low to High Audio Frequency Range ? Low Residual Noise: Rg = 0

文件：23.48 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Audio Power Amp, 7W

Description: The NTE1392 and NTE1393 are class B power amplifiers in a 10–Lead SIP type package designed especially for home tpe stereo amplifiers. These devices provide an output power of 5W at 19V, and also 7W at 22V to an 8? load with 10 distortion. Features: ? Available in Two Diffe

文件：23.59 Kbytes 頁數：2 Pages

NTE