Level measurement device with guided radar - sanitary version

The Type 8189 is a level measurement device with interchangeable rod probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. But the main application targets are in Food and Beverage (F&B) and pharmaceutical tan

文件：940.95 Kbytes 頁數：12 Pages

BURKERT

寶帝流體控制系統

Paddle-wheel sensor for low-flow rates

The compact low-flow sensor Type 8031 with paddle-wheel and Hall sensor is specially designed for use in aggressive and solid-free liquids. The particular cost attractive measuring principle is based on a local flow velocity measurement. The sensor produces a flow proportional frequency signal

文件：444.26 Kbytes 頁數：8 Pages

BURKERT

寶帝流體控制系統

Conductivity meter, ELEMENT design

The Bürkert conductivity meter Type 8222 is designed for measuring the conductivity of fluids. The sensor element comprises a two-electrode cell and a Pt1000 temperature probe. The sensor itself is available with three different cell constants C. These with C= 0.01 or 0.1 cm- 1 are fitted with

文件：1.99861 Mbytes 頁數：24 Pages

BURKERT

寶帝流體控制系統

Pressure measuring device / Switch

This intelligent mini transmitter/switch with an extra-large display is specially designed to switch alarms and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the three-key keypad under the display. In addition, the process value can be

文件：826.93 Kbytes 頁數：14 Pages

BURKERT

寶帝流體控制系統

Insertion magnetic inductive flowmeter

The electromagnetic flowmeter Type 8041 is made up of an electronic module and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more than 20 μS/cm in DN 06…DN 400 pipes. The Typ

文件：1.22937 Mbytes 頁數：19 Pages

BURKERT

寶帝流體控制系統

Pressure transmitter for general applications, 0…25 bar

This pressure transmitter is designed to cover the majority of industrial applications in the field of pressure measurement technology. High accuracy, compact design, robust construction and flexibility make the transmitter suitable for various measurement tasks. All wetted parts are made of st

文件：1.24532 Mbytes 頁數：13 Pages

BURKERT

寶帝流體控制系統

Magnetic inductive Insertion flowmeter

The electromagnetic flowmeter Type 8045 is made up of an electronic module including a backlit display, operating keys and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more t

文件：1.24727 Mbytes 頁數：20 Pages

BURKERT

寶帝流體控制系統

büS Distribution Box, IP65/ IP67/ IP69k

The büS distribution box Type ME66 is an extension module for Bürkert products (valves, sensors, process control systems), which is based on EDIP (Efficient Device Integration Platform) and used in processes requiring a high degree of protection. Type ME66 consists of network ports which allow

文件：1.31228 Mbytes 頁數：11 Pages

BURKERT

寶帝流體控制系統

Manually operated 2-way angle seat control valve

The Type 2960 control valve consists of a manual actuator and an angle seat valve body made of high-quality stainless steel. A parabolic cone enables a flow capacity that is up to 35 % higher compared to conventional control valves. The precise spindle guide enables control, even under dema

文件：873.18 Kbytes 頁數：15 Pages

BURKERT

寶帝流體控制系統

Flowmeter for gases

This flowmeter series is made for the measurement of especially large flow rates and use the calorimetric measuring principle. A heated sensor element is cooled down by the gas flow. This cooling effect which depends on the flow velocity and the gas characteristics serves as a flow indication,

文件：962.12 Kbytes 頁數：10 Pages

BURKERT

寶帝流體控制系統