Ultrasonic level measuring device

The type 8177 is a non-contact ultrasonic level measuring device, designed for continuous level measurement in open or closed vessels. The unit is suitable for liquids, but also for solids, in virtually all industries, particularly in water and waste water management. Type description

文件：702.7 Kbytes 頁數：9 Pages

BURKERT

寶帝流體控制系統

Insertion flowmeter/batch controller with paddle wheel and flow transmitter/remote batch controller

The Type 8025 device is specially designed for use in neutral or slightly aggressive, solid-free liquids. The device is provided as flowmeter or batch controller in a compact variant with paddle-wheel sensor or in a remote variant. The Bürkert-designed fitting system ensures simple installation

文件：1.54833 Mbytes 頁數：39 Pages

BURKERT

寶帝流體控制系統

Level measurement device with guided radar

The Type 8188 is a level measurement device with cable, rod, both interchangeable probe or with coax probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. With a measuring range up to 75 m, the 8188 is best sui

文件：1.32825 Mbytes 頁數：17 Pages

BURKERT

寶帝流體控制系統

Inline flowmeter for continuous measurements

The paddle wheel flowmeter Type 8030/8030-HT is especially designed for use with neutral, slightly aggressive, solid free liquids. The device is made up of a compact Inline sensor-fitting (Type S030/S030?HT) and a transmitter (Type SE30/SE30?HT). The device is quickly and easily assembled than

文件：825.52 Kbytes 頁數：14 Pages

BURKERT

寶帝流體控制系統

Level measurement device with guided radar - sanitary version

The Type 8189 is a level measurement device with interchangeable rod probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. But the main application targets are in Food and Beverage (F&B) and pharmaceutical tan

文件：940.95 Kbytes 頁數：12 Pages

BURKERT

寶帝流體控制系統

Paddle-wheel sensor for low-flow rates

The compact low-flow sensor Type 8031 with paddle-wheel and Hall sensor is specially designed for use in aggressive and solid-free liquids. The particular cost attractive measuring principle is based on a local flow velocity measurement. The sensor produces a flow proportional frequency signal

文件：444.26 Kbytes 頁數：8 Pages

BURKERT

寶帝流體控制系統

Conductivity meter, ELEMENT design

The Bürkert conductivity meter Type 8222 is designed for measuring the conductivity of fluids. The sensor element comprises a two-electrode cell and a Pt1000 temperature probe. The sensor itself is available with three different cell constants C. These with C= 0.01 or 0.1 cm- 1 are fitted with

文件：1.99861 Mbytes 頁數：24 Pages

BURKERT

寶帝流體控制系統

Pressure measuring device / Switch

This intelligent mini transmitter/switch with an extra-large display is specially designed to switch alarms and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the three-key keypad under the display. In addition, the process value can be

文件：826.93 Kbytes 頁數：14 Pages

BURKERT

寶帝流體控制系統

Insertion magnetic inductive flowmeter

The electromagnetic flowmeter Type 8041 is made up of an electronic module and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more than 20 μS/cm in DN 06…DN 400 pipes. The Typ

文件：1.22937 Mbytes 頁數：19 Pages

BURKERT

寶帝流體控制系統

Pressure transmitter for general applications, 0…25 bar

This pressure transmitter is designed to cover the majority of industrial applications in the field of pressure measurement technology. High accuracy, compact design, robust construction and flexibility make the transmitter suitable for various measurement tasks. All wetted parts are made of st

文件：1.24532 Mbytes 頁數：13 Pages

BURKERT

寶帝流體控制系統