YDA138-E中文資料雅馬哈數(shù)據(jù)手冊PDF規(guī)格書

■Overview

YDA138 (D-3) is a high efficient digital audio power amplifier IC that operates with a single 12V power supply. An audio power amplifier with a maximum output of 10W (RL=8Ω )× 2ch or 20W (RL=4Ω )× 1ch can be configured with one chip.

YDA138 has a “Pure Pulse Direct Speaker Drive Circuit” which directly drives speakers while reducing distortion of pulse output signal and reducing noise on the signal, and realizes the highest standard low distortion rate characteristics and low noise characteristics as 10W-class of output digital amplifier IC. In addition, circuit design with fewer external parts can be made depend on the condition of use because corresponds to filter less.

■Features

Digital Amplifier

?Continuous maximum output

10 W×2ch ＠ VDDP=12.0V, RL=8Ω , THD+N=10

20 W×1ch ＠ VDDP=12.0V, RL=4Ω , THD+N=10

?Efficiency

88 ＠ VDDP=12.0V, RL=8Ω , Po=10W

?Distortion Rate (THD+N)

0.02 ＠ VDDP=12.0V, RL=8Ω , Po=1.0W

?S/N Ratio

103dB ＠ VDDP=12.0V, RL=8Ω , Po=10W, VOL[1:0]=H,H

?Channel Separation

-70dB ＠ VDDP=12.0V, RL=8Ω , VOL[1:0]=H,H Class AB Headphone Amplifier

?Maximum output 50mW×2ch ＠ VDDP=12.0V, RL=32Ω , THD+N=10

?Distortion Rate(THD+N)

0.01 ＠ VDDP=12.0V, RL=32Ω , Pho=30mW

?S/N Ratio

95dB ＠ VDDP=12.0V, RL=32Ω , Pho=20mW, VOL[1:0]=H,H

Others

?Operating power supply range

9.0V to 13.5V

?Multi-channel synchronizing operation by

Master/Slave switching function

?Carrier frequency switching function

524kHz/466kHz

?Sleep function with SLEEPN terminal

?Output muting function with MUTEN terminal

?Over-current protection function

?Thermal protection function

?Clock stop detection function

?Pop noise reduction function

?AM interference measures function

?Analog input/BTL (Bridge-Tied Load) output

?42-pin plastic SSOP

Pin lead plating with Pd free (YDA138-EZ)