USB HID Controller

\nThe WT6513 is a single chip micro-controller for Universal Serial Bus (USB) low speed HID applications; it includes an 8-bits 6502 CPU core, 256 bytes SRAM, 8K bytes Mask ROM memory, 30 programmable I/O with built-in pull-up resistors and interrupt capability, 4 output with high drive capability u \n●8-bit 6502 CPU with 3MHz operating frequency\n●6MHz crystal oscillator\n●256 bytes SRAM\n●8K bytes Mask ROM memory\n●30 programmable I/O (package-dependant) pins, 8 with interrupt capability in input mode.\n●Embedded USB function with three endpoints (one control Enpoint0, two Interrupt IN endpoi;

Weltrend

偉詮

USB HID Controller

\nThe WT6513F is a single chip micro-controller for Universal Serial Bus (USB) low speed HID applications; it includes an 8-bits 6502 CPU core, 256 bytes SRAM, 8K bytes Flash ROM memory, 30 programmable I/O with built-in pull-up resistors and interrupt capability, 4 output with high drive capability \n●8-bit 6502 CPU with 3MHz operating frequency\n●6MHz crystal oscillator\n●256 bytes SRAM\n●8K bytes Flash ROM memory\n●30 programmable I/O (package-dependant) pins, 8 with interrupt capability in input mode.\n●Embedded USB function with three endpoints (one control Enpoint0, two Interrupt IN endpo;

Weltrend

偉詮

High-Side Switch

Description High side switch for USB is a high side switch having over current protection used in power supply line of universal serial bus (USB). Its switch unit has two channels of N-channel power MOSFET, and current of 500mA as USB standard can be flown to the respective channels. And, over cu

文件：215.45 Kbytes 頁數(shù)：6 Pages

ROHM

羅姆

2ch High Side Switch ICs for USB Devices and Memory Cards

文件：413.72 Kbytes 頁數(shù)：21 Pages

ROHM

羅姆

4-channel PWM driver for CD and MD use

文件：116.21 Kbytes 頁數(shù)：6 Pages

ROHM

羅姆