3W filter-free Class D audio power amplifer with 6-12dB fixed gain select

Description The TS2007 is a class D power audio amplifier. Able to drive up to 1.4 W into an 8 Ω load at 5 V, it achieves outstanding efficiency compared to typical class AB audio power amplifiers. This device allows switching between two different gains: 6 or 12dB via a logic signal on the GS p

文件：466.83 Kbytes 頁數：29 Pages

STMICROELECTRONICS

意法半導體

FAST SWITCHIING RECTIFIER(Reverse Voltage - 50 to 1000 Volts, Current - 2.0Ampere)

FAST SWITCHING PLASTIC RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes

文件：163.75 Kbytes 頁數：2 Pages

TRSYS

Transys Electronics

Filter-free stereo 2x2.8W class D audio power amplifer

Description The TS2012 is a stereo fully differential class D power amplifier. Able to drive up to 1.35W into an 8Ω load at 5V per channel. It achieves outstanding efficiency compared to typical class AB audio amps. Features ■ Operating range from VCC=2.5V to 5.5V ■ Standby mode active low ■

文件：376.49 Kbytes 頁數：30 Pages

STMICROELECTRONICS

意法半導體

Filter-free stereo 2x2.8 W class D audio power amplifier

Features ? Operating range from VCC = 2.5 V to 5.5 V ? Standby mode active low ? Output power per channel: 1.35 W @ 5 V or 0.68 W @ 3.6 V into 8 Ω with 1 % THD+N max ? Output power per channel: 2.2 W @ 5 V into 4 Ω with 1 % THD+N max ? Four gains can be selected: 6, 12, 18, 24 dB ?

文件：633.07 Kbytes 頁數：29 Pages

STMICROELECTRONICS

意法半導體

Filter-free stereo 2x2.8 W class D audio power amplifier

Features ? Operating range from VCC = 2.5 V to 5.5 V ? Standby mode active low ? Output power per channel: 1.35 W @ 5 V or 0.68 W @ 3.6 V into 8 Ω with 1 % THD+N max ? Output power per channel: 2.2 W @ 5 V into 4 Ω with 1 % THD+N max ? Four gains can be selected: 6, 12, 18, 24 dB ?

文件：633.07 Kbytes 頁數：29 Pages

STMICROELECTRONICS

意法半導體

Filter-free Flip Chip stereo 2 x 2.5 W class D audio power amplifier

Description The TS2012EI is a fully-differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features ? Operates from VCC = 2.5 to 5.5 V ? Dedicated standby mode active l

文件：553.92 Kbytes 頁數：32 Pages

STMICROELECTRONICS

意法半導體

Filter-free Flip Chip stereo 2 x 2.5 W class D audio power amplifier

Description The TS2012EI is a fully-differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features ? Operates from VCC = 2.5 to 5.5 V ? Dedicated standby mode active l

文件：553.92 Kbytes 頁數：32 Pages

STMICROELECTRONICS

意法半導體

Filter-free flip-chip stereo 2x2.5 W class D audio power amplifer

Description The TS2012 is a fully differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features ■ Operates from VCC= 2.5 V to 5.5 V ■ Dedicated standby mode active low

文件：598.88 Kbytes 頁數：31 Pages

STMICROELECTRONICS

意法半導體

Filter-free flip-chip stereo 2x2.5 W class D audio power amplifer

Description The TS2012 is a fully differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features ■ Operates from VCC= 2.5 V to 5.5 V ■ Dedicated standby mode active low

文件：598.88 Kbytes 頁數：31 Pages

STMICROELECTRONICS

意法半導體

Filter-free stereo 2x2.8W class D audio power amplifer

Description The TS2012 is a stereo fully differential class D power amplifier. Able to drive up to 1.35W into an 8Ω load at 5V per channel. It achieves outstanding efficiency compared to typical class AB audio amps. Features ■ Operating range from VCC=2.5V to 5.5V ■ Standby mode active low ■

文件：376.49 Kbytes 頁數：30 Pages

STMICROELECTRONICS

意法半導體