TPS79730集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

TPS79730屬于集成電路（IC）的線性+開關穩壓器。由德州儀器制造生產的TPS79730穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

1 Features

1? 50-mA Low-Dropout Regulator

? Ultra-Low 1.2-μA Quiescent Current at 10 mA

? 5-Pin SC70 (DCK) Package

? Integrated Power Good Output

? Stable With Any Capacitor Greater Than 0.47 μF

? Typical Dropout Voltage of 105 mV at 10 mA

(TPS79733)

? Over-Current Limitation

? Operating Junction Temperature Range of –40°C

to 85°C

2 Applications

? Battery-Powered Microcontrollers and

Microprocessors

3 Description

The TPS797xx family of low-dropout voltage

regulators (LDOs) offers the benefits of low-dropout

voltage and ultra-low-power operation. The device is

stable with any capacitor greater than 0.47-μF.

Therefore, implementations of this device require very

little board space due to the miniaturized packaging

and potentially small output capacitor. In addition, the

family includes an integrated open drain active-high

power good (PG) output. Intended for use in

microcontroller-based, battery-powered applications,

the TPS797xx family low dropout and ultra-low-power

operation result in a significant increase in system

battery operating life. The small packaging minimizes

consumption of board space.

The device is enabled when the applied voltage

exceeds the minimum input voltage. The usual PNP

pass transistor has been replaced by a PMOS pass

element. Because the PMOS pass element behaves

as a low-value resistor, the dropout voltage is very

low (typically, 105 mV at 10-mA of load current), and

is directly proportional to the load current. The

quiescent current is ultra-low (1.2-μA, typically) and is

stable over the entire range of output load current

(0 mA to 50 mA). When properly configured with a

pullup resistor, the PG output can implement a

power-on reset or low-battery indicator.