TPS2117 1.6-V to 5.5-V, 4-A Low IQ Power Mux With Manual and Priority Switchover

1 Features ? Input voltage range: 1.6 V to 5.5 V ? Maximum continuous current: 4 A ? On-resistance: 20 mΩ (typical) ? VIN2 standby current: 50 nA (typical) ? Quiescent current: 1.32 μA (typical) ? Switchover modes: – Priority mode – Manual mode – Diode mode ? Controlled output slew rate:

文件：1.45136 Mbytes 頁數：26 Pages

TI

德州儀器

TPS2117 1.6-V to 5.5-V, 4-A Low IQ Power Mux With Manual and Priority Switchover

1 Features ? Input voltage range: 1.6 V to 5.5 V ? Maximum continuous current: 4 A ? On-resistance: 20 mΩ (typical) ? VIN2 standby current: 50 nA (typical) ? Quiescent current: 1.32 μA (typical) ? Switchover modes: – Priority mode – Manual mode – Diode mode ? Controlled output slew rate:

文件：1.28779 Mbytes 頁數：26 Pages

TI

德州儀器

具有手動和優先級切換功能的 1.6V 至 5.5V、20m?、4A 低 IQ 電源多路復用器

TPS2117 是一款電源多路復用器，具有 1.6V 至 5.5V 的額定電壓和 4A 的最大額定電流。該器件使用 N 溝道 MOSFET 在電源之間切換，同時在第一次施加電壓時提供受控的壓擺率。\n\n憑借 1.32μA（典型值）的低靜態電流和 50nA（典型值）的低待機電流，TPS2117 適用于其中一個輸入由電池供電的系統。這些低電流延長了電池的使用壽命和續航時間。\n\nTPS2117 可根據應用配置用于兩種不同的切換操作。自動優先級模式優先選擇連接到 VIN1 的電源，在 VIN1 下降時將切換到次級電源 (VIN2)。手動模式允許用戶切換 GPIO 或使信號能夠在通道之間切換。 ? Input voltage range: 1.6 V to 5.5 V\n? On-resistance: 20 mΩ (typical)\n? Quiescent current: 1.32 μA (typical)\n? Priority mode\n? Diode mode\n? Controlled output slew rate: \n? Reverse current blocking when VOUT > VINx\n? Thermal shutdown;

TI

德州儀器

TPS2117 1.6-V to 5.5-V, 4-A Low IQ Power Mux With Manual and Priority Switchover

1 Features ? Input voltage range: 1.6 V to 5.5 V ? Maximum continuous current: 4 A ? On-resistance: 20 mΩ (typical) ? VIN2 standby current: 50 nA (typical) ? Quiescent current: 1.32 μA (typical) ? Switchover modes: – Priority mode – Manual mode – Diode mode ? Controlled output slew rate:

文件：1.28779 Mbytes 頁數：26 Pages

TI

德州儀器

絲?。?a target="_blank" title="Marking" href="/2117/marking.html">2117；Package：SOT-5X3；TPS2117 1.6-V to 5.5-V, 4-A Low IQ Power Mux With Manual and Priority Switchover

1 Features ? Input voltage range: 1.6 V to 5.5 V ? Maximum continuous current: 4 A ? On-resistance: 20 mΩ (typical) ? VIN2 standby current: 50 nA (typical) ? Quiescent current: 1.32 μA (typical) ? Switchover modes: – Priority mode – Manual mode – Diode mode ? Controlled output slew rate:

文件：1.28779 Mbytes 頁數：26 Pages

TI

德州儀器