TPS16632集成電路（IC）的電流調節/管理規格書PDF中文資料

TPS16632屬于集成電路（IC）的電流調節/管理。由德州儀器制造生產的TPS16632電流調節/管理電流調節和管理 IC 是用于監視和調節電路電流的半導體器件。功能包括電流表、限流、電流鏡、電流監控器、電流調節器、電流紋波抑制器、電流檢測、電流源、電流開關和電子保險絲，電流輸出從 100 μA 至 50 A 可調。

1 Features

? 4.5-V to 60-V operating voltage,

67-V absolute maximum

? Integrated 60-V, 31-mΩ RON hot-swap FET

? 0.6-A to 6-A adjustable current limit (±7)

? Low quiescent current, 21 μA in shutdown

? Adjustable output power limiting (TPS16632 only)

(±6)

? Adjustable UVLO and OVP cutoff with ±2

accuracy

– Fixed 39-V maximum overvoltage clamp

(TPS16632 only)

? Adjustable output slew rate control for inrush

current limiting

– Charges large and unknown capacitive loads

through thermal regulation during device power

up

? Power Good output (PGOOD)

? Selectable overcurrent fault response options

between auto-retry and latch off (MODE)

? Analog current monitor (IMON) output (±6)

? UL 2367 recognized

– File No. E169910

– RILIM ≥ 3 kΩ

? IEC 62368-1 certified

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? Available in easy-to-use 24-pin VQFN package

2 Applications

? Factory automation and control – PLC, DCS, HMI,

I/O modules, sensor hubs

? Motor drives – CNC, encoder supply

? Electronic circuit breakers

? Telecom radios

? Industrial printers

3 Description

The TPS1663x is an easy-to-use, positive 60-V, 6-

A eFuse with a 31-mΩ integrated FET. Protection

for the load, source, and eFuse itself are provided

along with adjustable features such as accurate

overcurrent protection, fast short circuit protection,

output slew rate control, overvoltage protection

and undervoltage lockout. The TPS16332 device

integrates adjustable output power limiting (PLIM)

functionality that simplifies and enables compliance

to standards such as IEC61010-1 and UL1310.

The device also includes adjustable overcurrent

functionality. PGOOD can be used for enable and

disable control of the downstream DC/DC converters.

A shutdown pin provides external control for enabling

and disabling the internal FET, as well as placing the

device in a low current shutdown mode. For system

status monitoring and downstream load control, the

device provides fault and a precise current monitor

output. The MODE pin allows flexibility to configure

the device between the two current-limiting fault

responses (latch off and auto-retry).

The devices are available in a 4-mm × 4-mm 24-pin

VQFN package and are specified over a –40°C to

+125°C temperature range.