MTCA.4 Rear-I/O μRTM for TAMC261

Application Information The TAMC020-TM is a standard Mid-Size/Full-Size MTCA.4 compliant Micro Rear Transition Module for TEWS’ TAMC261. It distributes all P14 I/O lines of a PMC residing on the TAMC261 from the zone 3 interface connectors to a PIM module slot. Additional lines are connected to

文件：143.27 Kbytes 頁數：1 Pages

TEWS

Transition Module for 3U cPCI PMC Carrier

Application Information The TCP030-TM is a 3U Transition Module to be used with 3U cPCI PMC carrier like TEWS’ TCP270-11R. It provides easy access to the PMC I/O lines of cPCI PMC carrier with back I/O. All 64 PMC I/O lines are distributed from the cPCI RJ2 connector to a 68 pin SCSI-3 type conn

文件：72.8 Kbytes 頁數：1 Pages

TEWS

PIM Carrier Transition Module for 3U cPCI

Application Information The TCP040-TM is a 3U PIM Carrier Transition Module to be used with 3U CompactPCI PMC carrier like TEWS’ TCP270 or 3U CompactPCI modules with back I/O. It provides easy access to the PMC I/O lines of 3HE CompactPCI PMC carriers and most TEWS CompactPCI Modules with back I/

文件：85 Kbytes 頁數：1 Pages

TEWS

PIM I/O Module with 68 pin Connector

Application Information The TPIM002 is a standard single-width PIM I/O module to be used with any PIM carrier. It offers easy access to the PMC back I/O lines of PMC carrier with back I/O. The TPIM002 distributes all PMC back I/O lines to a 68 pin SCSI-3 type connector located in the EMI front p

文件：70.71 Kbytes 頁數：1 Pages

TEWS

Conduction Cooled, 6 Channel SSI, Incremental Encoder, Counter

Application Information The TPMC317 is a conduction cooled single-width 32 bit PMC module and offers six independent channels. Each of these channels can operate as a standard SSI interface controller, in a SSI ‘Listen only’ Mode, as an incremental encoder or general purpose counter. The standar

文件：314.7 Kbytes 頁數：3 Pages

TEWS

Conduction Cooled PMC 4 Channel High Speed Synch/Asynch Serial Interface

Application Information The TPMC362 is a conduction cooled single-width 32 bit PMC with four high speed serial data communication channels. An Infineon PEF 20534 DMA Supported Serial Communication Controller (DSCC4) with integrated bus master PCI interface is used. Several interrupt sources can

文件：241.03 Kbytes 頁數：2 Pages

TEWS

16 Digital Inputs (24V) 16 Digital Outputs (24V, 0.5A)

Application Information The TPMC671 is a standard single-width 32 bit PMC with 16 24V digital inputs galvanically isolated from the computer system by optocoupler. The inputs are also potential free to each other. A high performance input circuit ensures a defined switching point and polarization

文件：372.82 Kbytes 頁數：2 Pages

TEWS

4 Channel High Speed Synch/Asynch Serial Interface

The TPMC862 is a standard single-width 32 bit PMC with four high speed serial data communication channels. An Infineon PEF 20534 DMA Supported Serial Communication Controller (DSCC4) with integrated bus master PCI interface is used. Several interrupt sources can generate interrupts on INTA for e

文件：76.32 Kbytes 頁數：2 Pages

TEWS

8/4 Channels of Isolated 16-bit D/A

Application Information The TPMC551 is a standard single-width 32-bit PMC module providing optically isolated 16-bit analog outputs. The number of D/A channels and the I/O connector depends on the module version. Settling time to 0.003% is 10 μs typical. Immediate and simultaneous loading

文件：376.25 Kbytes 頁數：2 Pages

TEWS

32 /16 Channels of 16 bit D/A with Memory

Application Information The TPMC554 is a standard single-wide 32 bit PMC module and provides 32/16 channels of 16 bit analog outputs. All signals are accessible through a HD68 SCSI-3 type front I/O connector. The software selectable output voltage ranges are 0V-5V, 0V-10V, 0V-10.8V, ±5V, ±10V an

文件：497.57 Kbytes 頁數：2 Pages

TEWS