MTCA.4 Rear-I/O μRTM for TAMC261

Application Information The TAMC020-TM is a standard Mid-Size/Full-Size MTCA.4 compliant Micro Rear Transition Module for TEWS’ TAMC261. It distributes all P14 I/O lines of a PMC residing on the TAMC261 from the zone 3 interface connectors to a PIM module slot. Additional lines are connected to

文件：143.27 Kbytes 頁數：1 Pages

TEWS

Conduction Cooled PMC, 4 Channel RS232/RS422/RS485

Application Information The TPMC376 is a conduction cooled single-width 32 bit PMC module offering 4 channels of high performance RS232/RS422/RS485 programmable asynchronous serial interface with P14 I/O. The serial channels can be individually programmed to operate as RS232, RS422 or RS485 full

文件：117.33 Kbytes 頁數：3 Pages

TEWS

Transition Module for 3U cPCI PMC Carrier

Application Information The TCP030-TM is a 3U Transition Module to be used with 3U cPCI PMC carrier like TEWS’ TCP270-11R. It provides easy access to the PMC I/O lines of cPCI PMC carrier with back I/O. All 64 PMC I/O lines are distributed from the cPCI RJ2 connector to a 68 pin SCSI-3 type conn

文件：72.8 Kbytes 頁數：1 Pages

TEWS

4 Channel Serial Interface RS232/RS422

Application Information The TPMC463 is a standard single-width 32 bit PMC module and offers 4 channels of high performance asynchronous serial interface. Three different standard modules are available: The TPMC463-10R provides 4 RS232 interfaces. The TPMC463-11R provides 4 RS422 interfaces. The

文件：114.98 Kbytes 頁數：3 Pages

TEWS

4 Channel RS232/RS422/RS485 Programmable Serial Interface

Application Information The TPMC466 is a standard single-width 32 bit PMC module and offers 4 channels of high performance RS232/RS422/RS485 programmable asynchronous serial interface. The module offers front panel I/O with a HD50 SCSI-2 type connector and P14 I/O. The serial channels can be ind

文件：120.27 Kbytes 頁數：3 Pages

TEWS

32 Channels of Isolated 12 bit A/D

The TPMC500 is a PCI Mezzanine Card compatible module providing 32 galvanically isolated multiplexed 16 bit ADC channels.. The data acquisition and conversion time is mode-dependent: Maximum 10μs without channel / gain change, maximum 12.5μs with channel / gain change. The ADC input channels

文件：271.41 Kbytes 頁數：2 Pages

TEWS

Two Independent Channels Extended CAN Bus

Application Information The TPMC816 is a standard single-width 32 bit PMC module with two complete CAN bus interfaces using two Bosch CC770 CAN controllers. The CC770 offers pin compatibility with Intel's 82527 CAN Controller and is a function replacement. Both channels are completely independent

文件：282.97 Kbytes 頁數：2 Pages

TEWS

Interbus-Master Interface Generation 4 ( G4 )

Application Information The TPMC821 is a standard single-width 32 bit PMC module and offers a complete PMC INTERBUS Master Generation 4 (G4) Interface. A MC68332 local controller and the IPMS3 INTERBUS protocol controller are used as controlling units on board of the TPMC821. The communication b

文件：450.42 Kbytes 頁數：2 Pages

TEWS

4 Channel Isolated Serial Interface RS232

Application Information The TPMC860 is a standard single-width 32 bit PMC module with four channels of high performance RS232 asynchronous interface. Each of the four channels is isolated from the system and against each other by optocoupler and on board DC/DC converter per channel. The serial c

文件：367.22 Kbytes 頁數：2 Pages

TEWS

4 Channel Isolated Serial Interface RS422/RS485

Application Information The TPMC861 is a standard single-width 32 bit PMC module with four channels of high performance RS422/485-HD/FD asynchronous serial interface. Each of the four channels is isolated from the system and against each other by optocoupler and on board DC/DC converter per

文件：585.58 Kbytes 頁數：2 Pages

TEWS