TMP75CID傳感器變送器的溫度傳感器-模擬數字輸出規格書PDF中文資料

TMP75CID屬于傳感器變送器的溫度傳感器-模擬數字輸出。由德州儀器制造生產的TMP75CID溫度傳感器 - 模擬和數字輸出模擬和數字輸出溫度傳感器可用于測量環境熱能量。特征包括傳感器類型、本地感測溫度、遠程感測溫度、輸出類型、電源電壓和分辨率。傳感器類型為模擬本地/遠程/紅外、模擬數字、本地/遠程、數字本地/遠程/紅外或內部，感應溫度范圍為 -55°C 至 200°C。

1 Features

1? Low-Voltage Alternative to NCT75 and ADT75

? Digital Output with Two-Wire Serial Interface

? Up to 8 Pin-Programmable Bus Addresses

? Overtemperature ALERT Pin with Programmable

Trip Values

? Shutdown Mode for Battery Power Saving

? One-Shot Conversion Mode

? Operating Temperature Range: –55°C to +125°C

? Operating Supply Range: 1.4 V to 3.6 V

? Quiescent Current:

– 15 μA Active (typ)

– 0.3 μA Shutdown (typ)

? Accuracy:

– ±0.25°C (typ) from 0°C to +70°C

– ±0.5°C (typ) from –20°C to +85°C

– ±1°C (typ) from –55°C to +125°C

? Resolution: 12 Bits (0.0625°C)

? Packages: SOIC-8 and VSSOP-8

2 Applications

? Server and Computer Thermal Management

? Telecommunication Equipment

? Office Machines

? Video Game Consoles

? Set-Top Boxes

? Power Supply and Battery Thermal Protection

? Thermostat Control

? Environmental Monitoring and HVAC

? Electrical Motor Driver Thermal Protection

3 Description

The TMP75C is an integrated digital temperature

sensor with a 12-bit analog-to-digital converter (ADC) that can operate at a 1.8-V supply, and is pin and

register compatible with the NCT75 and ADT75. This

device is available in SOIC-8 and VSSOP-8

packages and requires no external components to

sense the temperature. The TMP75C is capable of reading temperatures with a resolution of 0.0625°C

and is specified over a temperature range of –55°C to

+125°C.

The TMP75C features SMBus and two-wire interface

compatibility, and allows up to eight devices on the

same bus with the SMBus overtemperature alert function. The programmable temperature limits and

the ALERT pin allow the sensor to operate as a

stand-alone thermostat, or an overtemperature alarm

for power throttling or system shutdown.

The factory-calibrated temperature accuracy and the

noise-immune digital interface make the TMP75C the preferred solution for temperature compensation of

other sensors and electronic components, without the

need for additional system-level calibration or

elaborate board layout for distributed temperature

sensing.

The TMP75C is ideal for thermal management and

protection of a variety of consumer, computer, communication, industrial, and environmental

applications.