TMP1075傳感器變送器的溫度傳感器-模擬數字輸出規格書PDF中文資料

TMP1075屬于傳感器變送器的溫度傳感器-模擬數字輸出。由德州儀器制造生產的TMP1075溫度傳感器 - 模擬和數字輸出模擬和數字輸出溫度傳感器可用于測量環境熱能量。特征包括傳感器類型、本地感測溫度、遠程感測溫度、輸出類型、電源電壓和分辨率。傳感器類型為模擬本地/遠程/紅外、模擬數字、本地/遠程、數字本地/遠程/紅外或內部，感應溫度范圍為 -55°C 至 200°C。

1 Features

? Temperature accuracy:

– ±0.25°C (typical) from ?55°C to 125°C

– ±1°C (maximum) from ?40 °C to 110°C

– ±2°C (maximum) from ?55°C to 125°C

? Low power consumption:

– 2.7μA Average current

– 0.37μA Shutdown current

? Supply range options from: 1.62V to 5.5V

? Temperature independent of supply

? Digital interface: SMBus, I2C

? Software compatibility with industry standard LM75

and TMP75

? Can coexist in I3C mixed fast mode bus

? Resolution: 12 Bits

? Supports up to 32 I2C addresses

? ALERT pin function

? NIST traceability

2 Applications

? Power-supply temperature monitoring

? Connected peripherals & printers

? PC and notebooks

? Mobile phones

? Battery management

? Enterprise machine

? Thermostat

? Wireless environmental sensor and HVAC

? Electro mechanical device temperature

3 Description

The TMP1075 is the most accurate and lowest

power replacement to the industry standard LM75

and TMP75 digital temperature sensors. Available

in SOIC-8, VSSOP-8, WSON-8, and SOT563-6

packages, the TMP1075 offers pin-to-pin and

software compatibility to quickly upgrade any existing

xx75 design. The TMP1075 additional new packages

are a 2.0mm × 2.0mm DFN and a 1.6mm × 1.6mm

SOT563-6 reducing the printed circuit board (PCB)

footprint by 82% and 89% compared to the SOIC

package, respectively.

The TMP1075 has a ±1°C accuracy over a

wide temperature range and offers an on-chip 12-

bit analog-to-digital converter (ADC) providing a

temperature resolution of 0.0625°C.

Compatible with two-wire SMBus and I2C interfaces,

the TMP1075 support up to 32 device addresses and

provides SMBus Reset and Alert function.

The TMP1075 D, DGK, and DSG packages are

specified for operation over a temperature range of

?55°C to 125°C and the TMP1075N DRL package is

specified over the ?40°C to 125°C temperature range.

The TMP1075 units are 100% tested on a production

setup that is NIST traceable and verified with

equipment that is calibrated to ISO/IEC 17025

accredited standards.