TLC193MJGB中文資料德州儀器數據手冊PDF規(guī)格書

Very Low Power . . . 110 μW Typ at 5 V

Fast Response Time . . . tPLH = 2.5 μs Typ

With 5-mV Overdrive

Single Supply Operation:

TLC393C . . . 3 V to 16 V

TLC393I . . . 3 V to 16 V

TLC393Q . . . 4 V to 16 V

TLC393M . . . 4 V to 16 V

TLC193M . . . 4 V to 16 V

On-Chip ESD Protection

description

The TLC193 and TLC393 consist of dual

independent micropower voltage comparators

designed to operate from a single supply. They

are functionally similar to the LM393 but uses

one-twentieth the power for similar response

times. The open-drain MOS output stage

interfaces to a variety of loads and supplies. For

a similar device with a push-pull output

configuration (see the TLC3702 data sheet).

Texas Instruments LinCMOS. process offers

superior analog performance to standard CMOS

processes. Along with the standard CMOS

advantages of low power without sacrificing

speed, high input impedance, and low bias

currents, the LinCMOS. process offers extremely

stable input offset voltages, even with

differential input stresses of several volts. This

characteristic makes it possible to build reliable

CMOS comparators.

The TLC393C is characterized for operation over the commercial temperature range of TA = 0°C to 70°C. The

TLC393I is characterized for operation over the extended industrial temperature range of TA = .40°C to 85°C.

The TLC393Q is characterized for operation over the full automotive temperature range of TA = .40°C to 125°C.

The TLC193M and TLC393M are characterized for operation over the full military temperature range of

TA = .55°C to 125°C.