TIP830中文資料8 Channel 12 (16) bit Simultaneous Sampling A/D數(shù)據(jù)手冊(cè)TEWS規(guī)格書

描述 Description

The TIP818 is an IndustryPack? compatible module and provides a complete CAN bus interface using the Intel 82527 CAN controller. The Intel 82527 CAN controller supports the standard data and remote frame as well as the extended data and remote frame according to CAN specification 2.0 part A and part B. It has the capability to transmit, receive and perform message filtering on extended and standard messages. The TIP818 provides a 16 bit bus interface which permits word and byte accesses to the internal registers of the CAN controller. The physical interface is a fault tolerant CAN transceiver, which supports the communication between the CAN protocol controller and the physical bus. The interface is optically isolated from the CAN controller. The fault tolerant CAN transceiver supports transmission capability on either bus wire, if one of the bus wires is corrupted. The failure detection logic automatically selects a suitable transmission mode. The TIP818 is designed for fault tolerant CAN applications (based on Philips fault tolerant CAN transceiver TJA1053 or similar types) with up to 32 nodes and a baud rate up to 125kbaud.