THVD24xxV-EP Enhanced 3V to 5.5V RS-485 Transceivers With 1.8V VIO Capability

1 Features ? Meets or exceeds the requirements of the TIA/ EIA-485A and TIA/EIA-422B standards ? Enhanced Product – Military temperature range (-55°C to 125°C) – One wafer fabrication site and one assembly and test site – Gold bond wire, NiPdAu lead finish – Wafer lot traceability – Exten

文件：1.86221 Mbytes 頁數：37 Pages

TI

德州儀器

THVD24xxV ±70V Fault-Protected 3V to 5.5V RS-485 Transceivers with Flexible I/O Supply and IEC ESD

1 Features . Meets or exceeds the requirements of the TIA/ EIA-485A and TIA/EIA-422B standards . 3V to 5.5V RS-485 supply voltage . Differential output exceeds 2.1V for PROFIBUS compatibility with 5V supply . 1.65V to 5.5V Supply for logic signal interface . SLR Pin Selectable Data Rates:

文件：2.32516 Mbytes 頁數：41 Pages

TI

德州儀器

THVD24xxV-EP Enhanced 3V to 5.5V RS-485 Transceivers With 1.8V VIO Capability

1 Features ? Meets or exceeds the requirements of the TIA/ EIA-485A and TIA/EIA-422B standards ? Enhanced Product – Military temperature range (-55°C to 125°C) – One wafer fabrication site and one assembly and test site – Gold bond wire, NiPdAu lead finish – Wafer lot traceability – Exten

文件：1.91582 Mbytes 頁數：37 Pages

TI

德州儀器

THVD24xxV-EP Enhanced 3V to 5.5V RS-485 Transceivers With 1.8V VIO Capability

1 Features ? Meets or exceeds the requirements of the TIA/ EIA-485A and TIA/EIA-422B standards ? Enhanced Product – Military temperature range (-55°C to 125°C) – One wafer fabrication site and one assembly and test site – Gold bond wire, NiPdAu lead finish – Wafer lot traceability – Exten

文件：2.02953 Mbytes 頁數：40 Pages

TI

德州儀器

具有靈活 IO 和 70V 總線故障保護功能的 3V 至 5.5V、1Mbps、半雙工 RS-485 收發器

THVD24xxV 是具有 ±70V 故障保護功能的半雙工和全雙工 RS-422/RS-485 收發器，對邏輯信號接口使用 1.65V 至 5.5V 電源，對總線側使用 3V 至 5.5V 電源。這些器件具有壓擺率選擇功能，因此可在兩種最大速度（根據 SLR 引腳設置）下使用。\n\n這些器件具有集成式 IEC ESD 保護，無需外部系統級保護組件。在更長的電纜敷設長度和/或存在大接地環路電壓的情況下，擴展的 ±25V 輸入共模范圍可實現可靠的數據通信。增強型 250mV 接收器遲滯可提供高噪聲抑制。此外，當輸入同時開路或短路時，接收器失效防護功能可確保邏輯高電平。 ? 符合或超出 TIA/EIA-485A 和 TIA/EIA-422B 標準的要求\n? 差分輸出超過 2.1V，在 5V 電源下 與 PROFIBUS 兼容\n? SLR 引腳可選數據速率： \n? THVD2450V、THVD2452V：20Mbps 和 50Mbps\n? 總線 I/O 保護 \n? ±16kV HBM ESD\n? 全雙工器件：±8kV IEC 61000-4-2 接觸放電和空氣間隙放電\n? 提供兩種速度等級的半雙工和全雙工器件\n? 擴展的運行共模電壓范圍：±25V\n? 低功耗 \n? 適用于熱插拔功能的無干擾上電/斷電\n? 熱關斷\n? 小型 3mm x 3m;

TI

德州儀器

增強型產品：具有靈活 IO 和 70V 總線故障的 3V 至 5.5V、1Mbps、半雙工 RS-485 收發器

THVD24xxV-EP are ±70V fault-protected, half and full-duplex RS-422/RS-485 transceivers using a 1.65V to 5.5V logic supply for data and enable logic signals, and a 3V to 5.5V bus side supply. These devices have slew rate select feature that enables them to be used at two maximum speeds based on the S Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards\n \nEnhanced Product \n \nMilitary temperature range (-55°C to 125°C)\n \nOne wafer fabrication site and one assembly and test site\n \nGold bond wire, NiPdAu lead finish\n \nWafer lot traceability\n \nExtended product ;

TI

德州儀器