Class-D audio amplifier

文件：246.09 Kbytes 頁數：45 Pages

恩XP

Class-D audio amplifier

General description The TDA8932B is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 15 W in stereo half-bridge application (RL = 4 ?) or 1 × 30 W in mono full-bridge application (RL = 8 ?). Due to the low power dissipation the device can be

文件：319.42 Kbytes 頁數：48 Pages

恩XP

Class-D audio amplifier

General description The TDA8932B is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 15 W in stereo half-bridge application (RL = 4 ?) or 1 × 30 W in mono full-bridge application (RL = 8 ?). Due to the low power dissipation the device can be

文件：319.42 Kbytes 頁數：48 Pages

恩XP

Class-D audio amplifier

General description The TDA8932B is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 15 W in stereo half-bridge application (RL = 4 ?) or 1 × 30 W in mono full-bridge application (RL = 8 ?). Due to the low power dissipation the device can be

文件：319.42 Kbytes 頁數：48 Pages

恩XP

Class-D audio amplifier

文件：319.42 Kbytes 頁數：48 Pages

PHI

PHI

Class-D audio amplifier

文件：246.09 Kbytes 頁數：45 Pages

恩XP

Class-D audio amplifier

The TDA8932B is a high efficiency class-D amplifier with low power dissipation.\nThe continuous time output power is 2 x 15 W in stereo half-bridge application (RL= 4 Ω) or 1 x 30 W in mono full-bridge application (RL= 8 Ω). Due to the low power dissipation the device can be used without any externa Operating voltage from 10 V to 36 V asymmetrical or +-5 V to +-18 V symmetrical\nMono-bridged tied load (full-bridge) or stereo single-ended (half-bridge) application\nApplication without heat sink using thermally enhanced small outline package\nHigh efficiency and low-power dissipation\nThermally p;

恩XP

音頻放大器和前置放大器

恩XP

IC AMP AUD CLASS D 55W 32SO

恩XP