2 X 100 W class-D power amplifier

文件：209.7 Kbytes 頁數：34 Pages

PHI

PHI

2 X 100 W class-D power amplifier

文件：209.7 Kbytes 頁數：34 Pages

PHI

PHI

2 X 100 W class-D power amplifier

文件：209.7 Kbytes 頁數：34 Pages

PHI

PHI

2 x 100 W class-D power amplifier

Overview The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 100 W.\nThe device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates over a wide supply voltage range from + Zero dead time switching\nAdvanced current protection: output current limiting\nSmooth start-up: no pop noise due to DC offset\nHigh efficiency\nOperating supply voltage from +-12.5 V to +-30 V\nLow quiescent current\nUsable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Ti;

恩XP

2 x 100 W class-D power amplifier

Overview The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 100 W.\nThe device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates over a wide supply voltage range from + Zero dead time switching\nAdvanced current protection: output current limiting\nSmooth start-up: no pop noise due to DC offset\nHigh efficiency\nOperating supply voltage from +-12.5 V to +-30 V\nLow quiescent current\nUsable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Ti;

恩XP

2 x 100 W class-D power amplifier

Overview The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 100 W.\nThe device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates over a wide supply voltage range from + Zero dead time switching\nAdvanced current protection: output current limiting\nSmooth start-up: no pop noise due to DC offset\nHigh efficiency\nOperating supply voltage from +-12.5 V to +-30 V\nLow quiescent current\nUsable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Ti;

恩XP