DUAL-BRIDGE DRIVER IC

The TC78H621FNG is a dual-bridge driver IC which incorporates DMOS in output transistors. The TC78H621FNG is capable of driving 2 DC brushed motors or 1 stepping motor. Features ? Power supply voltage for motor : VM=18 V(Max) ? Power supply voltage for control : VCC=6 V(Max) ? Output curr

文件：397.62 Kbytes 頁數：15 Pages

TOSHIBA

東芝

1.8-V Dual bridge driver IC

The TC78H651AFNG is a dual bridge driver IC for DC motors/Stepping motors which incorporates DMOS with low ON resistance in output transistors. Forward, reverse, or stop mode can be selected. Over current detection, thermal shutdown, and under voltage lockout functions are implemented Featu

文件：402.66 Kbytes 頁數：14 Pages

TOSHIBA

東芝

1.8-V Dual bridge driver IC

The TC78H651FNG is a dual bridge driver IC for DC motors/Stepping motors which incorporate DMOS with low ON resistance in output transistors. Forward, reverse, or stop mode can be selected. Over current detection, thermal shutdown, and under voltage lockout functions are implemented. Featur

文件：473.77 Kbytes 頁數：14 Pages

TOSHIBA

東芝

1.8-V Dual H-bridge driver IC

The TC78H653FTG is a dual H-bridge driver IC for one or two DC brushed motors or one Stepping motor which incorporates DMOS with low ON resistance in output transistors. The TC78H653FTG has selectable forward, reverse, stop or brake mode. Over current detection, thermal shutdown, and under vo

文件：488.25 Kbytes 頁數：14 Pages

TOSHIBA

東芝

Dual H Bridge driver IC

2. Features ? Built-in Dual H Bridge ? PWM controlled constant-current drive ? Power supply operating voltage: 2.5 V to 16.0 V ? Output current ratings: 2.0 A (max) ? Low on-resistance (High + Low side = 0.48 Ω (typ.)) MOSFET output stage ? Built-in Sense resistor less current control archit

文件：513.36 Kbytes 頁數：26 Pages

TOSHIBA

東芝

Clock-in and Serial controlled Bipolar Stepping Motor Driver

2. Features ? Built-in Dual H Bridges, Capable of controlling 1 bipolar stepping motor ? PWM controlled constant-current drive ? Power supply operating voltage: 2.5 V to 16.0 V ? Output current ratings: 2.0 A (max) ? Low on-resistance (High + Low side = 0.48 Ω (typ.)) MOSFET output stage ? A

文件：1.4561 Mbytes 頁數：42 Pages

TOSHIBA

東芝

PWM Chopper Type Dual-Stepping Motor Driver

Two stepping motor drivers can drive up to four brushed DC motors. Incorporating two pairs of H-bridge drivers, the TC78S121FNG can drive two DC motors or a single stepping motor. Features ● Single-chip motor driver for bipolar stepping motor control ● Monolithic IC structured by CD proce

文件：695.99 Kbytes 頁數：30 Pages

TOSHIBA

東芝

PWM Chopper Type Dual-Stepping Motor Driver

Two stepping motor drivers can drive up to four brushed DC motors. Incorporating two pairs of H-bridge drivers, the TC78S121FTG can drive two DC motors or a single stepping motor. Features ● Single-chip motor driver for bipolar stepping motor control ● Monolithic IC structured by CD proce

文件：668.41 Kbytes 頁數：30 Pages

TOSHIBA

東芝

PWM Chopper Type Dual-Stepping Motor Driver

Two stepping motor drivers can drive up to four brushed DC motors. Incorporating two pairs of H-bridge drivers, the TC78S122FNG can drive two DC motors or a single stepping motor. Features ● Single-chip motor driver for bipolar stepping motor control ● Monolithic IC structured by CD proce

文件：620.67 Kbytes 頁數：31 Pages

TOSHIBA

東芝

PWM Chopper Type Dual-Stepping Motor Driver

Two stepping motor drivers can drive up to four brushed DC motors. Incorporating two pairs of H-bridge drivers, the TC78S122FTG can drive two DC motors or a single stepping motor. Features ● Single-chip motor driver for bipolar stepping motor control ● Monolithic IC structured by CD proce

文件：632.15 Kbytes 頁數：31 Pages

TOSHIBA

東芝