High Efficiency Boost Charge Pump Regulator

DESCRIPTION The SP6681 is a charge pump ideal for converting a +3.6V Li-Ion battery input to a +5.0V regulated output. An input voltage range of +2.7V to +5.5V is converted to a regulated output of 5.0V. The SP6681 device will operate at three different switching frequencies corresponding to thre

文件：125.91 Kbytes 頁數：10 Pages

SIPEX

六級能效快充

SP6681是一款高集成、高性能電流型PWM控制器，具有低功耗、寬電源電壓特點，適合應用在輸出范圍寬的PD充電器方案。\n\n該控制器同時也是一款兼容低成本、高性價比的離線反激式電路，在滿載輸出時，IC在固定頻率模式下工作，當負載減輕時，IC在谷底導通的綠色模式下工作，以此來提高電源轉換效率，當負載進一步減輕時，IC 工作在跳頻模式，使待機功耗最小化。該控制電路在整個負載范圍內都有比較高的轉換效率。\n\n????????SP6681提供了完整的保護功能，包括逐周期過流保護（OCP），過載保護（OLP），外部過溫保護（OTP），輸出短路保護（SCP），輸出過壓和VDD過壓保護。IC內部頻率轉換 ? 多種工作模式：\n125KHz最大頻率模式@ Peak Load，\n65KHz或45KHz固定頻率模式@Full Load，\n谷底導通開關@Green mode，\n跳頻模式@Light Load & No Load\n? 檢測輸出電壓實現自適應環路增益補償\n? 超低工作電流\n? 超寬VDD電壓范圍\n? 全線電壓內置OCP補償\n? 跳頻模式控制提高效率和降低待機功耗\n? 軟啟動降低MOSFET Vds應力\n? 抖頻改善EMI\n? 無噪聲工作;

Si-Power

硅動力

High Efficiency Boost Charge Pump Regulator

DESCRIPTION The SP6681 is a charge pump ideal for converting a +3.6V Li-Ion battery input to a +5.0V regulated output. An input voltage range of +2.7V to +5.5V is converted to a regulated output of 5.0V. The SP6681 device will operate at three different switching frequencies corresponding to thre

文件：125.91 Kbytes 頁數：10 Pages

SIPEX

High Efficiency Boost Charge Pump Regulator

DESCRIPTION The SP6681 is a charge pump ideal for converting a +3.6V Li-Ion battery input to a +5.0V regulated output. An input voltage range of +2.7V to +5.5V is converted to a regulated output of 5.0V. The SP6681 device will operate at three different switching frequencies corresponding to thre

文件：125.91 Kbytes 頁數：10 Pages

SIPEX

High Efficiency Boost Charge Pump Regulator

DESCRIPTION The SP6681 is a charge pump ideal for converting a +3.6V Li-Ion battery input to a +5.0V regulated output. An input voltage range of +2.7V to +5.5V is converted to a regulated output of 5.0V. The SP6681 device will operate at three different switching frequencies corresponding to thre

文件：125.91 Kbytes 頁數：10 Pages

SIPEX