SN74CBT3384C中文資料具有 –2V 下沖保護的 3.3V、1:1 (SPST)、10 通道通用 FET 總線開關數據手冊TI規格書

描述 Description

The SN74CBT3384C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3384C provides protection for undershoot up to ?2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.

The SN74CBT3384C is organized as two 5-bit bus switches with separate output-enable (1OE\\, 2OE\\) inputs. It can be used as two 5-bit bus switches or as one 10-bit bus switch. When OE\\ is low, the associated 5-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\\ is high, the associated 5-bit bus switch is OFF, and the high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74CBT3384C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3384C provides protection for undershoot up to ?2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.

The SN74CBT3384C is organized as two 5-bit bus switches with separate output-enable (1OE\\, 2OE\\) inputs. It can be used as two 5-bit bus switches or as one 10-bit bus switch. When OE\\ is low, the associated 5-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\\ is high, the associated 5-bit bus switch is OFF, and the high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

特性 Features

? Undershoot Protection for Off-Isolation on A and B Ports Up to –2 V
? Low ON-State Resistance (ron) Characteristics (ron = 3 Typical)
? Data and Control Inputs Provide Undershoot Clamp Diodes
? VCC Operating Range From 4 V to 5.5 V
? Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
? Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
? 2000-V Human-Body Model (A114-B, Class II)
? Supports Both Digital and Analog Applications: PCI Interface, USB Interface, Memory Interleaving, Bus Isolation, Low-Distortion Signal Gating

簡介

SN74CBT3384C屬于集成電路（IC）的信號開關多路復用器解碼器。由TI制造生產的SN74CBT3384C信號開關，多路復用器，解碼器邏輯型信號開關、多路復用器和編碼器 IC 可用于對以數字格式表示數據的電信號進行路由和選擇。這些器件與設計用于模擬信號的類似產品有所不同，它們保留的信息表示為兩個電狀態之一，而不是兩個外部界限內的無窮變化量。