SKY77458中文資料Front-end Module for LTE / EUTRAN Band VIII (Tx 880-915 MHz), (Rx 925-960 MHz)數據手冊Skyworks規格書

描述 Description

The SKY77458 Front-End Module (FEM) is a fully matched, 16-pad surface mount moduledeveloped for LTE/EUTRAN applications. Small and efficient, this LTE FEM integrates theinterstage filter, input and output matching, power amplifier, power detection, and duplexerinto a single 4 x 7 x 1.1 mm package. The SKY77458 meets the stringent spectrallinearity requirements of LTE with QPSK/16QAM modulations from 1.4 to 20MHz bandwidthand full or partial resource block allocations with high power added efficiency. The FEMincorporates Inter-Stage Filter and Duplexer, InGaP BiFET PA, and output power detector.

Integration of the RF front-end greatly simplifies the design of the 4G-compatible handsetradio or data card as all critical matching between the interstage filter, PA, power detection,and duplexer is optimized within the single module component. By optimizing the efficiencyof the InGaP BiFET PA MMIC, reducing RF loss between the integrated components andwithin the Duplexer itself, and improving the match between the PA and the Duplexer, thisFEM achieves low current at maximum output power that significantly reduces the powerdissipated in the LTE-enabled handsets or data cards. Primary bias to the SKY77458 issupplied via the VCC1 and VCC2 pads directly from a three-cell Ni-Cad, a single-cell Li-Ion,or other suitable batteries with outputs in the 3.0 to 4.6 volt range, while the bias network ispowered up with the VCCB pad. DC-DC converter operation can be supported with lowerpower operation down to 1.5V. Power down is accomplished by setting a logic low level onthe VEN pad. No external supply side switch is needed as typical \"off\" leakage is 100microamperes with full primary voltage supplied from the battery. The VMODE pad is used toswitch between high and low power modes to reduce current consumption and gain in theback – off conditions. VBA is used to further control the current consumption in the lowpower mode.

This small package uses Skyworks' low cost, multi - layer laminate substrate technology andis approximately half the size of individually packaged component solutions. The SKY77458front-end module can save handset and data card designers significant board space anddesign-cycle time, and significantly simplify supply chain and sourcing of RF components.

特性 Features

? QPSK, 16QAM, 64QAM modulations
? Up to 100 resource blocks
? Duplexer Tx-Rx attenuation and isolation: 50 dB
? Low voltage positive bias supply: 3.0 V to 4.6 V
? Excellent linearity, efficiency
? Low Profile 16-pad package: 4 mm x 7 mm x 1.1 mm
? InGaP BiFET Technology
? Skyworks Green? Packaging

應用 Application

? Smartphones
? 4G LTE