5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

文件：253.91 Kbytes 頁數：51 Pages

PHI

PHI

Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

文件：276.98 Kbytes 頁數：55 Pages

PHI

PHI

Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

文件：276.98 Kbytes 頁數：55 Pages

PHI

PHI

Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

文件：276.98 Kbytes 頁數：55 Pages

PHI

PHI

Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

文件：276.98 Kbytes 頁數：55 Pages

PHI

PHI

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

The SC16C554B/554DB is a 4-channel Universal Asynchronous Receiver and Transmitter (QUART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. It comes with an Intel (16 mode) o 4 channel UART\n5 V, 3.3 V and 2.5 V operation\nIndustrial temperature range (-40 ℃ to +85 ℃)\nThe SC16C554B is pin and software compatible with the industry-standard ST16C454/554, ST68C454/554, ST16C554, TL16C554\nThe SC16C554DB is pin and software compatible with ST16C554D, and software compatible;

恩XP

5 V、3.3 V和2.5 V的四通道UART，5 Mbit/s（最快），帶有16字節FIFO

SC16C554B/554DB是一款4通道通用異步接收器和發送器(QUART)，用于串行數據通信。其主要功能是將并行數據轉換成串行數據或?qū)⒋袛?shù)據轉換成并行數據。UART可處理最高5 Mbit/s的串行數據速率。附帶Intel（16模式）或Motorola（68模式）接口。\nSC16C554B/554DB的引腳兼容ST16C554和TL16C554，其功能等同于16C454。對控制寄存器進行編程可啟用SC16C554B/554DB的附加功能。其中一些附加功能為16字節接收和發送FIFO、四個接收觸發電平。SC16C554B/554DB還提供通過FIFO觸發電平以及TXRDY和RXRDY信號進 4通道UART\n5 V、3.3 V和2.5 V操作\n工業溫度范圍（-40 ℃至+85 ℃）\nSC16C554B的引腳和軟件兼容行業標準ST16C454/554、ST68C454/554、ST16C554、TL16C554\nSC16C554DB的引腳和軟件兼容ST16C554D，且軟件兼容ST16C454/554、ST16C554、TL16C554\n數據速率在5 V和3.3 V時最快為5 Mbit/s，而在2.5 V時最快為3 Mbit/s\n僅輸入引腳的容限為5 V\n16字節發送FIFO\n帶有錯誤標志的16字節接收FIFO\n可編程自動RTS和自動CTS 在自動CTS模式中，CT;

恩XP

總線轉UART

Flip