500W Transient Voltage Suppressor

Features ◇ Constructed with Glass Passivated Die ◇ Excellent Clamping Capability ◇ 500W Peak Pulse Power Dissipation ◇ Fast Response Time 100 Tested at Rated Peak Pulse Power ◇ Voltage Range 5.0 - 170 Volts ◇ Unidirectional and Bi-directional Versions ◇ Available (Note 1)

文件：196.07 Kbytes 頁數：3 Pages

LUGUANG

魯光電子

500W Transient Voltage Suppressor

Features ? Constructed with Glass Passivated Die ? Excellent Clamping Capability ? 500W Peak Pulse Power Dissipation ? Fast Response Time 100 Tested at Rated Peak Pulse Power ? Voltage Range 5.0 - 170 Volts ? Unidirectional and Bi-directional Versions ? Available (Note 1)

文件：2.85469 Mbytes 頁數：3 Pages

LUGUANG

魯光電子

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ? Glass passivated chip junction in DO-15 Package ? Low leakage ? Uni and Bidirectional unit ? Excellent clam

文件：646.25 Kbytes 頁數：6 Pages

UNSEMI

優恩半導體

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

文件：3.57065 Mbytes 頁數：7 Pages

UNSEMI

優恩半導體

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ? Glass passivated chip junction in DO-15 Package ? Low leakage ? Uni and Bidirectional unit ? Excellent clam

文件：475.54 Kbytes 頁數：6 Pages

SOCAY

碩凱股份

Transient Voltage Suppressors

FEATURES ◇ Plastic Sackage. ◇ Glass passivated chip junction. ◇ 500W Peak Pulse Power capability on 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Repetition rate (duty cycle): 0.01. ◇ Low incremental surge resistance. ◇ Fast response time: typically less than 1.0ps from 0 volt to B

文件：293.64 Kbytes 頁數：4 Pages

MERITEK

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 500W Peak Pulse Power Dissipation 5V- 170V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Pb ? Free Device All SM

文件：338.13 Kbytes 頁數：5 Pages

SMCDIODE

桑德斯微電子

Low voltage GSM front-end transceiver

DESCRIPTION The SA1620 is a combined receive (Rx) and transmit (Tx) front-end for GSM cellular telephones. The receive path contains two low noise amplifiers (LNA1 and LNA2) with four switchable attenuation steps. A Gilbert Cell mixer in the receive path down-converts the RF signal to a first I

文件：203.36 Kbytes 頁數：26 Pages

PHI

PHI

Low voltage GSM front-end transceiver

DESCRIPTION The SA1620 is a combined receive (Rx) and transmit (Tx) front-end for GSM cellular telephones. The receive path contains two low noise amplifiers (LNA1 and LNA2) with four switchable attenuation steps. A Gilbert Cell mixer in the receive path down-converts the RF signal to a first I

文件：203.36 Kbytes 頁數：26 Pages

PHI

PHI

IF quadrature transceiver

DESCRIPTION The SA1630 is a 70–400 MHz I/Q transceiver for wireless LAN. The Receive Path contains a digitally gain controlled linear IF amplifier, a pair of quadrature down conversion mixers and a pair of baseband amplifiers. The transmit path contains a pair of quadrature up conversion mixers t

文件：147.2 Kbytes 頁數：22 Pages

PHI

PHI