SYNCHRONOUS-RECTIFIED BUCK MOSFET DRIVERS

[RichTek] General Description The RT9600 is a high frequency, dual MOSFET driver specifically designed to drive two power NChannel MOSFETs in a synchronous-rectified buck converter topology. This driver combined with a RT9237 Multi-Phase Buck PWM controller form a complete core-voltage regulator

文件：154.47 Kbytes 頁數：6 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

Synchronous-Rectified Buck MOSFET Drivers

General Description\nThe RT9600 is a high frequency, dual MOSFET driver specifically designed to drive two power N-Channel MOSFETs in a synchronous-rectified buck converter topology. This driver combined with a RT9237 Multi-Phase Buck PWM controller form a complete core-voltage regulator solution fo Drives Two N-Channel MOSFETs\nAdaptive Shoot-Through Protection\nInternal Bootstrap Device\nSupports High Switching Frequency\n? Fast Output Rise Time\n? Propagation Delay 30ns\nSmall SOP-8 Package\nDual Gate-Drive Voltages for Optimal Efficiency\nThree-State Input for Bridge Shutdown\nSupply Under ;

Richtek

立锜科技

SYNCHRONOUS-RECTIFIED BUCK MOSFET DRIVERS

[RichTek] General Description The RT9600 is a high frequency, dual MOSFET driver specifically designed to drive two power NChannel MOSFETs in a synchronous-rectified buck converter topology. This driver combined with a RT9237 Multi-Phase Buck PWM controller form a complete core-voltage regulator

文件：154.47 Kbytes 頁數：6 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

12-Bit, Low Power Voltage Output D/A Converter

DESCRIPTION… The SP9600 is a very low power 12-Bit Digital-to-Analog Converter. It features 0.5 to 4.5 volt output swing when using a single +5volt supply. The converter uses a standard 3–wire serial interface compatible with SPI?, QSPI? and Microwire?. The output settling-time is specified at 20

文件：166.6 Kbytes 頁數：9 Pages

SIPEX

12-Bit, Low Power Voltage Output D/A Converter

DESCRIPTION… The SP9600 is a very low power 12-Bit Digital-to-Analog Converter. It features 0.5 to 4.5 volt output swing when using a single +5volt supply. The converter uses a standard 3–wire serial interface compatible with SPI?, QSPI? and Microwire?. The output settling-time is specified at 20

文件：166.6 Kbytes 頁數：9 Pages

SIPEX

12-Bit, Low Power Voltage Output D/A Converter

DESCRIPTION… The SP9600 is a very low power 12-Bit Digital-to-Analog Converter. It features 0.5 to 4.5 volt output swing when using a single +5volt supply. The converter uses a standard 3–wire serial interface compatible with SPI?, QSPI? and Microwire?. The output settling-time is specified at 20

文件：166.6 Kbytes 頁數：9 Pages

SIPEX