2A Bus Termination Regulator

General Description The RT9173B regulator is designed to convert voltage supplies ranging from 1.7V to 6V into a desired output voltage of which adjusted by two external voltage divider resistors. The regulator is capable of sourcing or sinking up to 2A of current while regulating an output vol

文件：262.54 Kbytes 頁數：13 Pages

RICHTEK

立锜科技

2A Bus Termination Regulator

General Description The RT9173B regulator is designed to convert voltage supplies ranging from 1.7V to 6V into a desired output voltage of which adjusted by two external voltage divider resistors. The regulator is capable of sourcing or sinking up to 2A of current while regulating an output vol

文件：262.54 Kbytes 頁數：13 Pages

RICHTEK

立锜科技

2A Bus Termination Regulator

General Description The RT9173B regulator is designed to convert voltage supplies ranging from 1.7V to 6V into a desired output voltage of which adjusted by two external voltage divider resistors. The regulator is capable of sourcing or sinking up to 2A of current while regulating an output vol

文件：262.54 Kbytes 頁數：13 Pages

RICHTEK

立锜科技

2A Bus Termination Regulator

General Description The RT9173B regulator is designed to convert voltage supplies ranging from 1.7V to 6V into a desired output voltage of which adjusted by two external voltage divider resistors. The regulator is capable of sourcing or sinking up to 2A of current while regulating an output vol

文件：262.54 Kbytes 頁數：13 Pages

RICHTEK

立锜科技

2A Bus Termination Regulator

General Description The RT9173B regulator is designed to convert voltage supplies ranging from 1.7V to 6V into a desired output voltage of which adjusted by two external voltage divider resistors. The regulator is capable of sourcing or sinking up to 2A of current while regulating an output vol

文件：262.54 Kbytes 頁數：13 Pages

RICHTEK

立锜科技

2A DDR 總線終端電壓調節器

RT9173B 是設計用于將 1.7V 至 6V 范圍內的輸入電壓轉換為由兩只外部電阻構成的分壓器所設定的輸出電壓的轉換器，其輸出具有釋出或吸入 2A 電流的能力以維持輸出電壓在設定值的 40mV 誤差范圍內。RT9173B 通常被用于和一系列終端電阻連接在一起，為那些高速內存總線和分布式主板的設計提供動態終端匹配用的優質電壓源，作為 DDR SDRAM 的終端匹配電壓源是其最常見的用法。由于同時具有釋出電流和吸入電流的限制，再加上內置的熱關斷功能，使它具有輸出故障情況下的容忍能力。RT9173B 可以常用的5引腳 TO-252 封裝 SOP-8 封裝形式供貨。在 SOP-8 封裝中，多個 V ? 支持 DDR ( 1.25VTT ) 和 DDR II ( 0.9VTT ) 應用\n? SOP-8 和 TO-252-5 封裝\n? 電流釋出和吸入的能力\n? 電流限制保護\n? 熱保護\n? 集成功率 MOFET\n? 為 SSTL-2 生成終端電壓\n? 全負載范圍內的高精度電壓輸出\n? 外部電阻可調 VOUT\n? 外部組件最少\n? 待機時關機或掛起操作模式為高阻輸出\n? 符合 RoHS 規范，完全無鉛;

Richtek

立锜科技

Package：TO-252-6，DPak（5 引線 + 接片）；包裝：卷帶（TR） 類別：集成電路（IC） 特殊用途穩壓器 描述：IC REG CONV DDR 1OUT TO252-5

Richtek USA Inc.

Package：8-SOIC（0.154"，3.90mm 寬）；包裝：管件 類別：集成電路（IC） 特殊用途穩壓器 描述：IC REG CONV DDR 1OUT 8SOP

Richtek USA Inc.