SINGLE-PHASE SILICON BRIDGE

FEATURES Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Surge overload rating: 50A peak

文件：134.3 Kbytes 頁數：2 Pages

CHENG-YI

辰頤電子

整流橋

RS210系列整流橋，采用玻璃鈍化工藝，具有極快的恢復時間和極小的過電損耗特性，產品穩定性強，漏電流低。專門用于顯示器、電視機、打印機、開關電源、適配器等全波整流中的通用電路。 ? 玻璃鈍化工藝\n? 低反向漏電流\n? 浪涌過載額定值至30A峰值\n? 不含鹵素且符合RoHS及Reach測試標準;

Semiware

賽米微爾

HALF-BRIDGE DRIVER

文件：665.13 Kbytes 頁數：15 Pages

IRF

Low ON-Resistance, Low Voltage, Dual, SPDT Analog Switch

The RS2102 is a dual, low on-resistance, singlepole double-throw (SPDT) analog switch that is designed to operate from1.8 V to 5.5 V.?\n\nThe RS2102 device can handle both analog and digital signals. It features fast switching speeds (tON = 29ns, tOFF = 17ns) and low on-resistance (2.4Ω TYP).?\n\nTh ? -3dB Bandwidth: 120MHz \n? High Speed, Typically 29ns \n? Supply Range: +1.8V to +5.5V \n? Low ON-State Resistance, 2.4Ω(TYP) \n? Break-Before-Make Switching \n? Rail-to-Rail Operation \n? TTL/CMOS Compatible \n? Extended Industrial Temperature? Range: -40°C to +125°C \nAPPLICATIONS? Wearable Devi;

RUNIC

潤石

Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch

The RS2103 is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.8 V to 5.5 V.?\n\nThe RS2103 device can handle both analog and digital signals. It features fast switching speeds (50ns) and low on-resistance (0.6Ω TYP).?\n\nApplications include signal gating, chopping ? -3dB Bandwidth: 30MHz \n? High Speed, Typically 50ns \n? Supply Range: +1.8V to +5.5V \n? Low ON-State Resistance, 0.6Ω(TYP) \n? Break-Before-Make Switching \n? Rail-to-Rail Operation \n? TTL/CMOS Compatible \n? Extended Industrial Temperature? Range: -40°C to +125°C \n? MicroSIZE PACKAGES: SOT363;

RUNIC

潤石