REG710集成電路（IC）的穩壓器-DC-DC開關穩壓器規格書PDF中文資料

REG710屬于集成電路（IC）的穩壓器-DC-DC開關穩壓器。由德州儀器制造生產的REG710穩壓器 - DC-DC 開關穩壓器DC-DC 開關穩壓器 PMIC（電源管理集成電路）產品族中的產品是元器件級設備，用于需要穩定 DC 輸入電壓和/或?qū)⑵滢D(zhuǎn)換為不同幅度的輸出電壓的應用。這些器件與稱為“控制器”PMIC 的類似產品的區別在于集成了主開關元件，設備提供的電力會通過該元件。

1 Features

1? Wide Input Voltage Range: 1.8 V to 5.5 V

? Automatic Step-Up and Step-Down Operation

? Low Input Current Ripple

? Low Output Voltage Ripple

? Minimum Number of External Components—No

Inductors

? 1-MHz Internal Oscillator Allows Small Capacitors

? Shutdown Mode

? Thermal and Current Limit Protection

? Six Fixed Output Voltages Available:

– 2.5 V, 2.7 V, 3 V, 3.3 V, 5 V, 5.5 V

2 Applications

? White LED Driver

? Smart Card Readers

? SIM Cards

? Handheld devices

? Modems

? PCMCIA Cards

? LCD Displays

? Battery Backup Supplies

3 Description

The REG710 family of devices are switched capacitor

voltage converters that generate regulated, low-ripple output voltage from an unregulated input voltage. A

wide input supply voltage from 1.8 V to 5.5 V makes

the REG710 family of devices ideal for a variety of

battery sources, such as single-cell Li-Ion, or 2-cell

and 3-cell nickel-based or alkaline-based chemistries.

The input voltage may vary above and below the

output voltage and the output remains in regulation. The device works as step-up or step-down converters

without the need of an inductor, providing low EMI

DC-DC conversion. The high switching frequency

allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG710

device is thermally protected and current limited, protecting the load and the regulator during fault

conditions. Typical ground pin current (quiescent

current) is 65 μA with no load, and less than 1 μA in shutdown mode.