REF1925AIDDCT集成電路（IC）的電壓基準規格書PDF中文資料

REF1925AIDDCT屬于集成電路（IC）的電壓基準。由德州儀器制造生產的REF1925AIDDCT電壓基準產品屬于基準電壓源系列，可通過相對較不穩定的電源提供穩定的電勢，電壓值始終保持恒定，以便在測量、控制和類似應用中用作比較的標準。其功能行為可能與用于大功率調節的線性穩壓器相似，但基準電壓源器件卻不適合用于此類用途。用作比較標準時，若輸出電流容量或?qū)嶋H負載電流增大，其性能通常會降低。

1 Features

1? Two Outputs, VREF and VREF / 2, for Convenient

Use in Single-Supply Systems

? Excellent Temperature Drift Performance:

– 25 ppm/°C (max) from –40°C to 125°C

? High Initial Accuracy: ±0.1% (max)

? VREF and VBIAS Tracking over Temperature:

– 6 ppm/°C (max) from –40°C to 85°C

– 7 ppm/°C (max) from –40°C to 125°C

? Microsize Package: SOT23-5

? Low Dropout Voltage: 10 mV

? High Output Current: ±20 mA

? Low Quiescent Current: 360 μA

? Line Regulation: 3 ppm/V

? Load Regulation: 8 ppm/mA

2 Applications

? Digital Signal Processing:

– Power Inverters

– Motor Controls

? Current Sensing

? Industrial Process Controls

? Medical Equipment

? Data Acquisition Systems

? Single-Supply Systems

3 Description

Applications with only a positive supply voltage often

require an additional stable voltage in the middle of

the analog-to-digital converter (ADC) input range to

bias input bipolar signals. The REF19xx provides a

reference voltage (VREF) for the ADC and a second

highly-accurate voltage (VBIAS) that can be used to

bias the input bipolar signals.

The REF19xx offers excellent temperature drift

(25 ppm/°C, max) and initial accuracy (0.1%) on both

the VREF and VBIAS outputs while operating at a

quiescent current less than 430 μA. In addition, the

VREF and VBIAS outputs track each other with a

precision of 6 ppm/°C (max) across the temperature

range of –40°C to 85°C. All these features increase

the precision of the signal chain and decrease board

space, while reducing the cost of the system as

compared to a discrete solution. Extremely low

dropout voltage of only 10 mV allows operation from

very low input voltages, which can be very useful in

battery-operated systems.

Both the VREF and VBIAS voltages have the same

excellent specifications and can sink and source

current equally well. Very good long-term stability and

low noise levels make these devices ideally-suited for

high-precision industrial applications.