QUADRUPLE E1 FRAMER

Description The PM6344 Quadruple E1 Framer (EQUAD) is a feature-rich device suitable for use in many E1 systems with a minimum of external circuitry. Each of the framers and transmitters is independently software configurable, allowing feature selection without changes to external wiring. On the

文件：1.030369 Mbytes 頁數：2 Pages

PMC

QUADRUPLE E1 FRAMER

Description The PM6344 Quadruple E1 Framer (EQUAD) is a feature-rich device suitable for use in many E1 systems with a minimum of external circuitry. Each of the framers and transmitters is independently software configurable, allowing feature selection without changes to external wiring. On the

文件：1.030369 Mbytes 頁數：2 Pages

PMC

Octal E1 Framer

FEATURES ? Integrates eight E1 framers in a single device for terminating duplex E1 signals. ? Supports transfer of PCM data to/from 2.048 MHz system-side devices. Also supports a fractional E1 system interface with independent ingress/egress fractional E1 rates. ? Provides an optio

文件：66.38 Kbytes 頁數：4 Pages

PMC

Octal E1 Framer

FEATURES ? Monolithic single-chip device that integrates eight datacom E1 framers and transmitters for terminating duplex E1 signals. ? Frames to ITU-T G.704 basic and CRC-4 multiframe formatted E1 signals and is consistent with ITU-T G.706 specifications. ? Extracts/inserts up to three HDLC li

文件：56.52 Kbytes 頁數：2 Pages

PMC

Octal E1 Framer

FEATURES ? Monolithic single-chip device that integrates eight datacom E1 framers and transmitters for terminating duplex E1 signals. ? Frames to ITU-T G.704 basic and CRC-4 multiframe formatted E1 signals and is consistent with ITU-T G.706 specifications. ? Extracts/inserts up to three HDLC li

文件：56.52 Kbytes 頁數：2 Pages

PMC

50 - 65 WATTS SINGLE & MULTIPLE OUTPUT AC/DC MEDICAL

Features ? Low safety ground leakage current. ? Wide input range 85 to 264Vac. ? Input surge current protection. ? Overvoltage protection. ? Overcurrent protection. ? Open PCB construction. ? 100 burn-in at full rated load.

文件：591.67 Kbytes 頁數：2 Pages

POWERBOX

65 WATT MEDICAL POWER SUPPLIES

DESCRIPTION The PM65 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 50 to 65 watts of continuous power. They are ideally suited for use in medical equipment not for patient contact, and operate at 85 to 264 VAC input voltage without the need of v

文件：220.78 Kbytes 頁數：2 Pages

TRUMPOWER

PM650 Medical & ITE Power Supplies (650-700W)

Features: ? EN61000-3-2 class A and D compliant ? Power Factor 0.98 typical ? Overvoltage Protection ? Short-circuit– Protection ? Thermal Protection ? Power Fail Detect (PFD) signal ? 100% burn– in at full load ? Remote sense on output #1 and output #2 ? Remote inhibit– TTL high to d

文件：725.53 Kbytes 頁數：4 Pages

TTELEC

PM650 Medical & ITE Power Supplies (650-700W)

Features: ? EN61000-3-2 class A and D compliant ? Power Factor 0.98 typical ? Overvoltage Protection ? Short-circuit– Protection ? Thermal Protection ? Power Fail Detect (PFD) signal ? 100% burn– in at full load ? Remote sense on output #1 and output #2 ? Remote inhibit– TTL high to d

文件：725.53 Kbytes 頁數：4 Pages

TTELEC

PM650 Medical & ITE Power Supplies (650-700W)

Features: ? EN61000-3-2 class A and D compliant ? Power Factor 0.98 typical ? Overvoltage Protection ? Short-circuit– Protection ? Thermal Protection ? Power Fail Detect (PFD) signal ? 100% burn– in at full load ? Remote sense on output #1 and output #2 ? Remote inhibit– TTL high to d

文件：725.53 Kbytes 頁數：4 Pages

TTELEC