Silicon NPN Transistor HV Darlington Power Amp, Switch

Description: The NTE97 is a silicon NPN Darlington transistor in a TO3 type package designed for high voltage, high–speed, power switching in inductive circuits where fall–time is critical. They are particularly suited for line operated switch–mode applications. Applications: ● Switching Regula

文件：28.06 Kbytes 頁數：3 Pages

NTE

Linear Integrated Circuit 3-Terminal Adjustable Positive Voltage Regulator 1.2V to 33V, 3A

Description: The NTE970 is an adjustable 3–terminal positive voltage regulator in a TO3 type package capable of supplying in excess of 3 Amps over a 1.2V to 33V output range. Features: Adjustable Output Down to 1.2V Guaranteed 3A Output Current Line Regulation Typically 0.005/V

文件：25.47 Kbytes 頁數：2 Pages

NTE

Linear Integrated Circuit Voltage Regulator, Negative, -24V, 1A

Description: The NTE924 fixed–voltage regulator is a monolithic integrated circuit in a TO220 type package designed for use in a wide variety of applications including local, on–card regulation. This regulator employs internal current limiting, thermal shutdown, and safe–area compensation. With a

文件：23.99 Kbytes 頁數：2 Pages

NTE

Integrated Circuit 3-Terminal Positive Voltage Regulator, 24V

The NTE972 fixed–voltage regulator is a monolithic integrated circuit in a TO220 type package designed for use in a wide variety of applications including local, on–card regulation. This regulator employs internal current limiting, thermal shutdown, and safe–area compensation. With adequate heatsi

文件：24.1 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Double Balanced Modulator/Demodulator

Description: The NTE973D is a balanced modulatior/demodulator in a 14–Lead DIP type package designed for use where the output voltage is a product of an input voltage (signal) and a switching function (carrier). Typical applications include suppressed carrier and amplitude modulation, synchronou

文件：27.6 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Double Balanced Modulator/Demodulator

Description: The NTE973D is a balanced modulatior/demodulator in a 14–Lead DIP type package designed for use where the output voltage is a product of an input voltage (signal) and a switching function (carrier). Typical applications include suppressed carrier and amplitude modulation, synchronou

文件：27.6 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Phase-Frequency Detector

Description: The NTE974 consists of two digital phase detectors, a charge pump, and an amplifier. In combination with a voltage controlled multivibrator, it is useful in a broad range of phase–locked loop applications. The circuit accepts MTTL waveforms at the R and V inputs and generates an erro

文件：28.23 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Operational Amplifier

Description: The NTE975 and NTE975SM are general purpose operational amplifiers built on a single chip. The resulting close match and tight thermal coupling gives low offsets and temperature drift as well as fast recovery from thermal transients. The unity–gain compensation specified makes t

文件：26.39 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Operational Amplifier

Description: The NTE975 and NTE975SM are general purpose operational amplifiers built on a single chip. The resulting close match and tight thermal coupling gives low offsets and temperature drift as well as fast recovery from thermal transients. The unity–gain compensation specified makes t

文件：26.39 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Positive 3 Terminal Voltage Regulator, 100mA

Description: The NTE950, NTE951, and NTE977 are positive 3–terminal voltage regulators in available in a TO92 type package. With adequate heat sinking these regulators can deliver 100mA output current. Current limiting is included to limit peak output current to safe value. Safe area protection

文件：27.38 Kbytes 頁數：3 Pages

NTE