Intergrated Circut 4 x 40W Quad Bridge Car Radio Amplifier

Description: The NTE7163 is a new technology class AB audio power amplifier in a 25?Lead Staggered SIP type package designed for high end car radio applications. Thanks to the PNP/NPN output configuration the NTE7163 allows a rail to rail output voltage swing with no need of bootstrap capacitors.

文件：43.62 Kbytes 頁數：3 Pages

NTE

Double−Balanced Mixer & Oscillator

Description: The NTE7164 is a low?power VHF monolithic double?balanced mixer with input amplifier, on?board oscillator, and voltage regulator in an 8?Lead DIP type package designed for use in high performance, low power communication systems. The gain, intercept performance, low?power and noise c

文件：64.22 Kbytes 頁數：2 Pages

NTE

DMOS Audio Amplifier, 100W, for Self -Powered Loudspeakers

Description: The NTE7165 is a monolithic integrated circuit in a 15-Lead Staggered SIP type package designed for use as an audio class AB amplifier in Hi-Fi field applications (Home Stereo, self-powered loud speakers, Top-Class TV). Thanks to the wide voltage range and to the high output current

文件：31.56 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Flyback Switching Regulator

Description: The NTE7166 is an integrated circuit in a 5-Lead Staggered TO3P type package and is specifically designed to satisfy the requirements for increased integration and reliability in off-line quasi-resonant flyback converters. This device incorporates a primary control and drive circui

文件：30.37 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Vertical Deflection Output Circuit

Description: The NTE7167 is a vertical deflection output integrated circuit in a 7-Lead SIP type package designed for use in high-resolution television and CRT display systems that use a bus controller system signal processing IC. It can directly drive the deflection yoke (including the required

文件：27.24 Kbytes 頁數：2 Pages

NTE

Integrated Circuit NTSC Single Chip Color TV

Description: The NTE7168 combines all the functions required for an NTSC color TV system in a 56- Lead DIP type package. This device includes PIF/SIF circuits, video/chroma/deflection circuits, chroma band pass filters, red and green OSD interfaces, and 1ch Audio Video switches.

文件：30.09 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Audio Power Amplifier, 32W

Description: The NTE7169 is a monolithic integrated circuit in a 5-Lead TO220 type package intended for use as an audio class AB audio amplifier. Thanks to its high power capability, the NTE7169 is able to provide up to 35W true RMS power into a 4? load (THD = 10, VS = ±18V, f = 1kHz) and up to

文件：30.45 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Vertical Deflection Booster

Description: The NTE7170 is an integrated circuit in a 7-Lead SIP type package designed for use in monitors and high performance TVs. This vertical deflection booster delivers flyback voltages close to 90V and operates with supplies up to 42V and provides up to 2AP-P output current to drive the

文件：31.45 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Quad EIA−422 Line Receiver With Three−State Outputs

Description: The NTE7174 is a Quad EIA?422/3 Receiver in a 16?Lead DIP type package that features four independent receiver chains which comply with EIA Standards for the Electrical Characteristics of Balanced/Unbalanced Voltage Digital Interface Circuits. The Receiver outputs are 74LS compatible

文件：39.68 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Quad EIA−422 Line Driver With Three−State Outputs

Description: The NTE7175 is a Quad EIA?422 Driver in a 16?Lead DIP type package that features four independent driver chains which comply with EIA Standards for the Electrical Characteristics of Balanced Voltage Digital Interface Circuits. The outputs are three?state structures which are forced t

文件：40.31 Kbytes 頁數：3 Pages

NTE