Integrated Circuit Pulse Width Modulator (PWM) Control Circuit

Description: The NTE1753 is a fixed–frequency pulse width modulation control circuit in a 14–Lead DIP type pack age incorporating the primary building blocks required for the control of a switching power supply. Output pulse width modulation is accomplished by comparison of the positive sawt

文件：36.28 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Vertical Deflection Output Circuit

Description: The NTE1754 is a full–performance vertical deflection output circuit in a 9–Lead SIP type package intended for direct drive of the deflection coils and it can be used for a wide range of 90° and 110° deflection systems. The NTE1754 is provided with a guard circuit which blanks the

文件：29.03 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Remote Control Receiver

Description: The NTE1757 is an MOS/LSI integrated circuit in an 18–Lead DIP tpye package designed for use as a receiver of remote control signals generated by a transmitter circuit, using PPM (Pulse Position Modulation) encoding technique. The receiver has 5 digital outputs whose response to PP

文件：35.77 Kbytes 頁數：3 Pages

NTE

Integrated Circuit CMOS, 27 Command TV Remote Control Transmitter

Description: The NTE1758 is a CMOS integrated circuit in a 16–Lead DIP type package designed for controlling the transmitter of remote control systems for TV sets, etc. By using this device in combination with the NTE1759 receiver control IC, a direct channel control system can be obtained. Whe

文件：26.15 Kbytes 頁數：3 Pages

NTE

Integrated Circuit PMOS, 26 Command TV Remote Control Reciever

Description: The NTE1759 is a PMOS integrated circuit in a 16–Lead DIP type package designed for use in decoding the signal received from a transmitter in TV remote control applications. Direct channel selection can be obtained by combining the NTE1759 receiver with the NTE1758 transmitter cont

文件：23.41 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Infrared Remote Control Preamp

Features: High Frequency Amplifier with a Control Range of 66dB Synchronous Demodulator and Reference Amplifier AGC Detector Pulse Shaper Q–Factor Killing of the Input Selectivity, which is Controlled by the AGC Circuit Input Voltage Limiter Absolute Maximum Ratings:

文件：26.48 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Infrared Remote Control Preamp

Features: High Frequency Amplifier with a Control Range of 66dB Synchronous Demodulator and Reference Amplifier AGC Detector Pulse Shaper Q–Factor Killing of the Input Selectivity, which is Controlled by the AGC Circuit Input Voltage Limiter Absolute Maximum Ratings:

文件：26.48 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Infrared Preamplifier

Description: The NTE1764 is an infrared preamplifier in a 14–Lead DIP type package and contains four main parts: the gain–controlled amplifier I, the amplifier II, the pulse–separating amplifier III, and the inverter IV. The amplifier I has a wide dynamic range and thus ensures interference

文件：20.79 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Dual Channel Current Mode Controller

Description: The NTE1765 is a high performance, fixed frequency, dual current mode controller in a 16–Lead DIP type package. This device is specifically designed for Off–Line and DC to DC converter applications offering the designer a cost effective solution with minimal external components. Th

文件：31.65 Kbytes 頁數：4 Pages

NTE

Integrated Circuit Reversible Motor Driver

Description: The NTE1766 is a reversible motor driver in a 10–Lead SIP type package capable for directly driving a motor containing a brush, requiring reversible rotation. Features: ? High Output Current: IOmax = 2.2A ? Built–In Thermal Shutdown Circuit ? Output Voltage Setting Te

文件：22.71 Kbytes 頁數：2 Pages

NTE