Integrated Circuit B/W TV Video Detector Amplifier, IF AGC Circuit

Description: The NTE1610 is an integrated circuit in a 9–Lead SIP type package designed for use as a B/W TV video detector amplifier and IF AGC circuit. Features: High Gain IF Signal to Video Signal Conversion (Detection) and Operates with Low Input Signal Level No Adjustment for IF

文件：19.08 Kbytes 頁數：2 Pages

NTE

Integrated Circuit Video and FM Sound Modulator/Carrier Oscillator for VCR

Features: Video Clamp White Clip Main Carrier Oscillator Main Carrier Attenuator Video Modulator Sound Modulator Sound FM Modulator Channel Switch Low Power Operation Adjustable Output Power Level and V/A Ratio with External Resistance Minimum Number of External Pa

文件：24.34 Kbytes 頁數：3 Pages

NTE

Integrated Circuit AF PO, 0.7W for Battery Use

Features: Wide Operating Voltage (2V to 6V) Power Amplifier has High Output (430mW), Low Noise (0.25mVRMS) and Low Distortion (0.4) Maximum Output can be 700mW High Ripple Rejection Ratio (typically 46dB) Very Low High–Frequency Distortion and a Sort Cuppea Wave Form make this a Sup

文件：18.7 Kbytes 頁數：2 Pages

NTE

Integrated Circuit B/W TV Tuner Bandswitch Circuit

Description: The NTE1615 is an integrated circuit in a 9–Lead SIP type package designed for use as a B/W TV tuner bandswitch circuit. Features: Continuous VHF Band Tuning without High and Low Band Switching Operation Low Drain Current from Tuning Reference Voltage Supply High Brea

文件：18.27 Kbytes 頁數：2 Pages

NTE

Integrated Circuit TV Sound IF Amp/Detector, Driver

Description: The NTE1616 is a TV sound integrated circuit in a 14–Lead DIP type package that can be operated with no adjustment, using ceramic filters externally. This device contains a DC controlled attenuator, which has wide effective area and gentle characteristic in the changing, so it is c

文件：20.97 Kbytes 頁數：2 Pages

NTE

Integrated Circuit TV Video IF Amp/AGC

Features: Good noise characteristics in strong signal condition made posible by IF AGC delayed operation inside circuit. Wide range of gain reduction and IF AGC. Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . .

文件：69.57 Kbytes 頁數：2 Pages

NTE

Silicon NPN Transistor TV Vertical Deflection

Description: The NTE162 is an NPN transistor in a TO3 type case designed for medium–to–high voltage inverters, converters, regulators, and switching circuits. Features: ? High Voltage: VCEX = 400V ? Gain Specified to 3.5A ? High Frequency Response to 2.5MHz

文件：24.04 Kbytes 頁數：2 Pages

NTE

Integrated Circuit B/W TV Video IF Amplifier, RF AGC Circuit

Description: The NTE1620 is an integrated circuit in a 9–Lead SIP type package designed for use as a B/W TV video IF amplifier and RF AGC circuit. Typical applications inclued low voltage operation (6V) and small B/W TVs. Features: ? Low Voltage Operation Video IF Circuit with Minimum N

文件：19.3 Kbytes 頁數：2 Pages

NTE

Integrated Circuit AM/FM Radio Circuit w/Power Amp

Features: ? Suitable for Use in AM/FM Portable Radios or Main–fed AM/FM Clock Radios. ? Incorporates AM RF Amp, AM Local Oscillator, AM Mixer, AM/FM IF Amp, AM/FM Detector, AM AGC Circuit, FM AFC Circuit and B Class–Audio Power Amplifier. ? Using the NTE1624, Plus the Discrete Input Stage

文件：24.79 Kbytes 頁數：4 Pages

NTE

Integrated Circuit 4.2W Dual Audio Power Amplifier

Description: The NTE1626 is a dual audio power amplifier in a 12?Lead SIP type package designed for use in a stereo radio cassette. This device has two audio power amplifiers and each of the two provides 4.2W power at 12V/4?. Features: ? High Output Power: 4.2W/ch (Typ) VCC = 12V,

文件：79.86 Kbytes 頁數：2 Pages

NTE