Integrated Circuit 10-Step Adjustable Analog Level Detector

Description: The NTE1507 is an integrated circuit in a 16–Lead DIP type package consisting of ten comparators and a reference voltage network to detect the level of a signal at the analog input. Output Q1 is switched to a low logic level at a typical input voltage of 200mV with Threshold Adjust

文件：23.89 Kbytes 頁數：3 Pages

NTE

Integrated Circuit 10-Step Dot/Bar Display Driver for Linear Scale

Description: The NTE1508 is a monolithic integrated circuit in an 18–Lead DIP type package that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and progr

文件：31.27 Kbytes 頁數：3 Pages

NTE

Integrated Circuit 10-Step Dot/Bar Display Driver for Logarithmic Scale

Description: The NTE1509 is a monolithic integrated circuit in an 18–Lead DIP type package that senses analog voltage levels and drives 10 LEDs, LCDs, or vacuum fluorescent displays, providing a logarithmic 3dB analog display. A single pin changes the display from a bar graph to a moving dot di

文件：30.38 Kbytes 頁數：4 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: ? Zener Voltage 110V to 200V ? Low Cost ? Low Zener Impedance ? Excellent Clamping ? Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 頁數：4 Pages

NTE

Integrated Circuit 5-Step LED Driver for Linear Scale

Description: The NTE1510 is an integrated circuit in an 8–Lead SIP type package designed for use in level meter applications. This device is capable of driving 5 LEDs to create a bar–type display. In accordance with the input level, the uppermost LED brightness varies to form a linear indicator

文件：19.49 Kbytes 頁數：2 Pages

NTE

Integrated Circuit 5-Step LED Driver for Linear Scale

Description: The NTE1511 is an integrated circuit in an 14–Lead DIP type package designed for use in level meter applications. This device is capable of driving 5 LEDs to create a bar–type display. In accordance with the input level, the uppermost LED brightness varies to form a linear indicato

文件：25.26 Kbytes 頁數：3 Pages

NTE

Integrated Circuit 9-Step LED Driver Circuit for Logarithmic Scale

Functions: ? Indication Way: Indicates input level in a series bar by 9 red or green LED’s ? Input Amp: DC amp installed the aim of which can be varied by a peripheral resistor. ? Comparator Level: Designed with 3dB rate; –18dB, –15dB, –12dB, –9dB, –6dB, –3dB

文件：24.03 Kbytes 頁數：3 Pages

NTE

Integrated Circuit 5-Step LED Driver for Logarithmic Scale

Features: ? Useful for Both AC and DC Level Meter as VU Meter or Signal Meter ? Wide Supply Voltage Ramge: VCC = 4.4V to 12V ? DC Amplifier Included

文件：25.06 Kbytes 頁數：3 Pages

NTE

Integrated Circuit 5-Step LED Driver for Logarithmic Scale

Features: ? Useful for Both AC and DC Level Meter as VU Meter or Signal Meter ? Wide Supply Voltage Ramge: VCC = 4.4V to 12V ? DC Amplifier Included

文件：25.06 Kbytes 頁數：3 Pages

NTE

Integrated Circuit Audio Power Amp, 1.8 Watt

Description: The NTE1516 is a silicon monolithic integrated circuit in an 8?Lead DIP plastic package with a tab designed for audio power amplifiers used in portable radio receivers or portable cassette tape recorders using a 9V power supply. Features: ? High Output Power: PO = 2.4W (Typ

文件：81.46 Kbytes 頁數：3 Pages

NTE