Current-Shunt Monitor, Voltage Output Bi-Directional Zero-Drift

文件：72.45 Kbytes 頁數：5 Pages

ONSEMI

安森美半導體

Bi-Directional Zero-Drift

文件：71.74 Kbytes 頁數：5 Pages

ONSEMI

安森美半導體

Low- or High-Side Current Sensing

文件：523.62 Kbytes 頁數：15 Pages

ONSEMI

安森美半導體

絲印：AZY；Package：SC70-6；Low- or High-Side Current Sensing

文件：523.62 Kbytes 頁數：15 Pages

ONSEMI

安森美半導體

Bi-Directional Zero-Drift

文件：71.74 Kbytes 頁數：5 Pages

ONSEMI

安森美半導體

Current-Shunt Monitor, Voltage Output Bi-Directional Zero-Drift

文件：72.45 Kbytes 頁數：5 Pages

ONSEMI

安森美半導體

電流分路監控器，26V， 電壓輸出，雙向，零漂移，低壓側或高壓側電流感應

The NCS199A1R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with m ? Wide common mode input range -0.3 V to 26 V\n? High-Side Current Sensing for High Voltage Systems\n? Low offset voltage ± 150 μV Max\n? Low Ohm value Current Sense Resistors\n? Low Offset Drift: 0.5 μV/°C\n? High accuracy over temperature leading to better power efficiency\n? Supply voltage range ;

ONSEMI

安森美半導體

NCS199A2: Current Sense Amplifier, 1.5% Max. Gain Error, Bi-Directional Zero-Drift, -0.3V to 26V CMIVR

The NCS199A1, NCS199A2 and NCS199A3 are voltage output\ncurrent shunt monitors that can measure voltage across shunts at\ncommon?mode voltages from ?0.3 V to 26 V, independent of supply\nvoltage. Three fixed gains are available: 50 V/V, 100 V/V or 200 V/V.\nThe low offset of the zero?drift architect Wide common mode input range -0.3 V to 26 V\nHigh-Side Current Sensing for High Voltage Systems\nSupply voltage range from 2.7 V to 26 V\nFlexible System Supply Voltage\nLow offset voltage ±150μV Max\nLow Value Current Sense Resistors for Better Power Efficiency\nLow offset drift\nTemperature Sensit;

ONSEMI

安森美半導體

電流分路監控器，26V，電壓輸出，雙向，零漂移，低壓側或高壓側電流感應

The NCS199A2R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with m ? Wide common mode input range -0.3 V to 26 V\n? High-Side Current Sensing for High Voltage Systems\n? Low offset voltage ± 150 μV Max\n? Low Ohm value Current Sense Resistors\n? Low Offset Drift: 0.5 μV/°C\n? High accuracy over temperature leading to better power efficiency\n? Supply voltage range ;

ONSEMI

安森美半導體