絲?。?a target="_blank" title="Marking" href="/1100/marking.html">1100；Package：SOT23-6；16-Bit ADC with On-board Reference

PRODUCT DESCRIPTION The MS1100 is a 16bit high-precision ADC. The on-board reference provides a differential input range of ±2.048V. The MS1100 uses an I2C serial interface. The power supply ranges from 2.7V to 5.5V. The MS1100 can perform conversions at rates of 15, 30, 60 or 240 samples per

文件：411.5 Kbytes 頁數：16 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

Tactical Grade MEMS Accelerometer

Designed to address advanced, tactical grade inertial applications, the MS1000 is a new class of high performance accelerometers, based on Safran Colibrys’ 25-year MEMS development and production expertise.\r\n\r\n MS1000 implements an innovative microelectromechanical design and electronics whic ? Long Term Bias Repeatability : 1.2 mg (+/10g, typ)\r\n? Residual Bias Modeling error : 0.7 mg (+/10g, typ)\r\n? In-run bias stability (Allan Variance @ 10 s): 15 μg (+/10g, typ)\r\n? Non Linearity (IEEE Norm, % of full scale) : 0.3 %;

SAFRAN

賽峰

16-bit 內置基準模數轉換器

MS1100 是一款高精度 16bit 模數轉換器。內部集成 2.048V 基準源，差分輸入范圍達到±2.048V。使用了 I2C 兼容接口。電源電壓范圍為 2.7V 到 5.5V。\nMS1100 轉換速率為 15、30、60 或 240SPS，集成有可編程增益放大器，增益最高可到 8 倍。在單次轉換模式，MS1100 在轉換結束后會自動進入省電狀態，減小功耗。\nMS1100 可用在高精度測量以及對空間、功耗有一定要求的應用場合中，如：手持儀器、工業控制和智能變送器。 ? I2C 接口\n? 片上基準：2.048V±0.5%\n? 溫度漂移：10ppm/°C\n? 內部集成 PGA：1 到 8 倍\n? 內部集成振蕩器\n? 16 位無失碼精度\n? INL（積分非線性誤差）：0.01%\n? 8 個可用 I2C 地址\n? 可編程輸出速率：15SPS 到 240SPS\n? 工作電壓范圍：2.7V 到 5.5V\n? 低電源功耗：315μA;

Relmon

瑞盟科技

Schottky Diodes

DACO

罡境電子