2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

文件：1.07113 Mbytes 頁數：21 Pages

MPS

美國芯源

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

文件：1.4669 Mbytes 頁數：21 Pages

MPS

美國芯源

2A、QFN 3mmx3mm 封裝單節或雙節鋰離子(Li+)電池充電器

MP2615 是一款高效率開關型電池充電器，適用于單節或雙節鋰離子電池以及鋰聚合物電池應用。在整個輸入范圍，MP2615 能夠提供的最大充電電流為 2A，此電流可以通過一個精確的檢測電阻進行調節。\n\nMP2615 采用兩個控制環路分別控制充電電流和電池充滿電壓，以實現高精度的恒流充電（CC）和恒壓充電（CV）。 \n\n恒定關斷時間（COT）控制模式下電路工作占空比高達99%，這樣即使在電池電壓接近輸入電壓時，仍然可以保持相對較大的電流對電池進行充電。\n\n在每個充電周期內，監測電池溫度和充電狀態。提供兩個狀態指示引腳，指示電池充電狀態和輸入電源狀態。MP2615 還具有(防止電 ? 4.75V 至 18V 輸入工作電壓\n? 占空比高達 99%\n? 可編程充電電流高達 2A\n? 電池充滿電壓精度為 ±0.75%\n? 電池充滿電壓有4.1V/節 和 4.2V/節可選\n? 功率開關管全集成\n? 內部環路補償\n? 無需外部反向阻斷二極管\n? 耗盡電池的預充電功能\n? 充電狀態指示\n? 可編程安全充電定時器\n? 過溫保護\n? 逐周期過流保護\n? 電池溫度監測和保護;

MPS

美國芯源

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

文件：1.07113 Mbytes 頁數：21 Pages

MPS

美國芯源

2.1A, 1-Cell or 2-Cell Li-Ion Battery Charger in (3mmx3mm) Package

DESCRIPTION The MP2615C is a high-efficiency, switch-mode battery charger suitable for single-cell or dualcell Li-ion or Li-polymer applications. The device is capable of delivering 2.1A of charge current, which can be configured via an accurate current-sense resistor across the entire inpu

文件：1.12933 Mbytes 頁數：22 Pages

MPS

美國芯源

絲?。?a target="_blank" title="Marking" href="/bmr/marking.html">BMR；Package：QFN-16；2.1A, 1-Cell or 2-Cell Li-Ion Battery Charger in (3mmx3mm) Package

DESCRIPTION The MP2615C is a high-efficiency, switch-mode battery charger suitable for single-cell or dualcell Li-ion or Li-polymer applications. The device is capable of delivering 2.1A of charge current, which can be configured via an accurate current-sense resistor across the entire inpu

文件：1.12933 Mbytes 頁數：22 Pages

MPS

美國芯源

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

文件：1.07113 Mbytes 頁數：21 Pages

MPS

美國芯源

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

文件：1.07113 Mbytes 頁數：21 Pages

MPS

美國芯源

2A, 1- or 2- Cell Li-ion Battery Charger In 3mm x 3mm Package

DESCRIPTION The MP2615 is a high efficiency switch mode battery charger suitable for 1- or 2- cell lithiumion or lithium-Polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range. The MP2615 regulates th

文件：1.07113 Mbytes 頁數：21 Pages

MPS

美國芯源

2 A, 1- or 2- Cell Li-Ion Battery Charger in 3mm x 3mm Package

文件：1.76476 Mbytes 頁數：21 Pages

MPS

美國芯源