Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good

文件：105.22 Kbytes 頁數(shù)：4 Pages

MA-COM

Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good

文件：248.02 Kbytes 頁數(shù)：4 Pages

MACOM

Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good

文件：168.71 Kbytes 頁數(shù)：4 Pages

MACOM

(non-RoHS) Termination Insensitive

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also ·Intermodulation Ratio is Insensitive to Port Mismatches\n·MIL-STD-883 Screening Available\n·Lo Power: +24 dBm Max\n·Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C\n·Impedance: 50 Ohms Nominal\n·Isolation: 35 dB Typical Midband\n·VSWR: <2.0:1 Typical Midband;

MACOM