Termination-Insensitive Mixer, 1 - 7 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a go

文件：80.91 Kbytes 頁數：3 Pages

MA-COM

Termination-Insensitive Mixer 1 - 7 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a go

文件：144.37 Kbytes 頁數：3 Pages

MACOM

Termination-Insensitive Mixer

文件：80.91 Kbytes 頁數：3 Pages

MA-COM

Termination-Insensitive Mixer, 1 - 7 GHz

Description\nThe unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good m ? Intermodulation Ratio Insensitive to IF Ports Mismatches\n? Impedance: 50 Ohms Nominal\n? Low Power: +24 dBm Max.\n? MIL-STD-883 Screening Available?;

MACOM

Termination-Insensitive Mixer 1 - 7 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a go

文件：144.37 Kbytes 頁數：3 Pages

MACOM

Termination-Insensitive Mixer

文件：80.91 Kbytes 頁數：3 Pages

MA-COM

(non-RoHS) Termination Insensitive

The MDC-162-SMA unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good ma ·Intermodulation Ratio Insensitive to IF Ports Mismatches\n·MIL-STD-883 Screening Available\n·Low Power: +24 dBm Max.\n·Maximum Input Power: 350 mW max. @ 25°C, Derated 3.5 mW/°C\n·Impedance: 50 Ohms Nominal\n·Conversion Loss: 6 dB Typical Midband;

MACOM

Package：模塊，SMA 連接器；包裝：盒 類別：RF/IF，射頻/中頻和 RFID 射頻混頻器 描述：MIXER,TB,MW,TIM

MACOM Technology Solutions