Configurable Octal Serial Switch with Serial Peripheral Interface I/O

文件：760.19 Kbytes 頁數：25 Pages

FREESCALEFreescale Semiconductor, Inc

飛思卡爾飛思卡爾半導體

Configurable Octal Serial Switch

文件：1.60242 Mbytes 頁數：25 Pages

FREESCALEFreescale Semiconductor, Inc

飛思卡爾飛思卡爾半導體

Configurable Octal Serial Switch with Serial Peripheral Interface I/O

文件：760.19 Kbytes 頁數：25 Pages

FREESCALEFreescale Semiconductor, Inc

飛思卡爾飛思卡爾半導體

Configurable Octal Serial Switch with Serial Peripheral Interface I/O

文件：760.19 Kbytes 頁數：25 Pages

FREESCALEFreescale Semiconductor, Inc

飛思卡爾飛思卡爾半導體

Configurable Octal Serial Switch with Serial Peripheral Interface I/O

文件：760.19 Kbytes 頁數：25 Pages

FREESCALEFreescale Semiconductor, Inc

飛思卡爾飛思卡爾半導體

Configurable Octal Serial Switch with Serial Peripheral Interface I/O

文件：590.68 Kbytes 頁數：25 Pages

FREESCALEFreescale Semiconductor, Inc

飛思卡爾飛思卡爾半導體

Configurable Octal Serial Switch with Serial Peripheral Interface I/O

文件：590.68 Kbytes 頁數：25 Pages

FREESCALEFreescale Semiconductor, Inc

飛思卡爾飛思卡爾半導體

Switch, Congifurable 8 Channels, SOIC 28

The 恩XP? MC33880 is an 8-output hardware configurable high side/low side switch with 8-bit serial input control using the serial peripheral interface (SPI).\nTwo of the outputs can be controlled directly via MCU for pulse-width modulation (PWM) applications\nControls various inductive or incandescen ? Designed to operate 5.5 V ≤ VPWR ≤ 24.5 V\n? 8-bit SPI for control and fault reporting, 3.3/ 5.0 V compatible\n? Outputs are current limited (0.8 A to 2.0 A) to drive incandescent lamps\n? Output voltage clamp is +45 V (typical) (low side drive) and -20 V (typical) (high side drive) during inducti;

恩XP

Switch, Congifurable 8 Channels, SOIC 32

The 恩XP? MC33880 is an 8-output hardware configurable high side/low side switch with 8-bit serial input control using the serial peripheral interface (SPI).\nTwo of the outputs can be controlled directly via MCU for pulse-width modulation (PWM) applications\nControls various inductive or incandescen ? Designed to operate 5.5 V ≤ VPWR ≤ 24.5 V\n? 8-bit SPI for control and fault reporting, 3.3/ 5.0 V compatible\n? Outputs are current limited (0.8 A to 2.0 A) to drive incandescent lamps\n? Output voltage clamp is +45 V (typical) (low side drive) and -20 V (typical) (high side drive) during inducti;

恩XP