MC100LVE310中文資料Clock / Data Fanout Buffer, 2:8 Differential, ECL, 3.3 V數據手冊O(shè)NSEMI規格書

描述 Description

The MC100LVE310 is a low voltage, low skew 2:8 differential ECL fanout buffer designed with clock distribution in mind. The device features fully differential clock paths to minimize both device and system skew. The LVE310 offers two selectable clock inputs to allow for redundant or test clocks to be incorporated into the system clock trees. To ensure that the tight skew specification is met it is necessary that both sides of the differential output are terminated into 50, even if only one side is being used. In most applications all eight differential pairs will be used and therefore terminated. In the case where fewer than eight pairs are used it is necessary to terminate at least the output pairs adjacent to the output pair being used in order to maintain minimum skew. Failure to follow this guideline will result in small degradations of propagation delay (on the order of 10-20 ps) of the outputs being used, while not catastrophic to most designs this will result in an increase in skew. Note that the package corners isolate outputs from one another such that the guideline expressed above holds only for outputs on the same side of the package. The MC100LVE310, as with most ECL devices, can be operated from a positive VCC supply in LVPECL mode. This allows the LVE310 to be used for high performance clock distribution in +3.3 V systems. Designers can take advantage of the LVE310's performance to distribute low skew clocks across the backplane or the board. In a PECL environment series or Thevenin line terminations are typically used as they require no additional power supplies, if parallel termination is desired a terminating voltage of VCC-2.0 V will need to be provided. For more information on using PECL, designers should refer to Application Note AN1406/D. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connecte

特性 Features

? 200ps Part-to-Part Skew
? 50ps Output-to-Output Skew
? The 100 Series Contains Temperature Compensation
? ESD Protection: >2 KV HBM, >200 V MM
? PECL Mode Operating Range: VCC = 3.0 V to 3.8 V with VEE = 0 V
? NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -3.8 V
? Internal Input Pulldown Resistors
? Q Output will Default LOW with All Inputs Open or at VEE
? Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
? Moisture Sensitivity Level 1For Additional Information, see Application Note AND8003/D
? Flammability Rating: UL-94 code V-0 @ 1/8\", Oxygen Index 28 to 34
? Transistor Count = 212 devices
? Pb-Free Packages are Available

簡介

MC100LVE310屬于集成電路（IC）的時鐘緩沖器驅動器。由ONSEMI制造生產的MC100LVE310時鐘緩沖器，驅動器時鐘緩沖器和驅動器集成電路產品族中的產品用于幫助信號在系統中傳輸，常用作頻率/時間參考信號，以同步系統內的活動。盡管這些器件最常用到的功能就是緩沖（即，為使信號不受驅動負載的影響而從某個信號源復制信號），但是該產品族中的某些器件還能執行其他功能，例如選擇性改變緩沖信號路徑、按某個整數值分割信號頻率，或進行所用電信號格式轉換。