High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

General Description The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：141.82 Kbytes 頁數：12 Pages

MAXIM

美信

High-Speed, Micropower, Low-Voltage

General Description The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：329.88 Kbytes 頁數：13 Pages

MAXIM

美信

High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail IO Comparators

文件：329.88 Kbytes 頁數：13 Pages

MAXIM

美信

High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

文件：329.88 Kbytes 頁數：13 Pages

MAXIM

美信

高速、微功耗、低電壓、SOT23封裝、滿擺幅輸入/輸出比較器

MAX987/MAX988/MAX991/MAX992/MAX995/MAX996單通道/雙通道/四通道微功耗比較器具有低電壓工作和軌到軌輸入和輸出。其工作電壓范圍為+2.5V至+5.5V，因此非常適合用于3V和5V系統。這些比較器還采用±1.25V至±2.75V雙電源供電。每個比較器的電流消耗僅為48μA，同時實現120ns傳播延遲。\n\n 輸入偏置電流典型值為1.0pA，輸入失調電壓典型值為0.5mV。即便輸入信號傳送緩慢，內部遲滯也能確保干凈的輸出切換。\n\n 輸出級的專門設計限制了開關時的電源電流浪涌，幾乎消除了許多其他比較器常見的電源毛刺。MAX987/MAX ? 傳輸延遲：120ns\n\n? 靜態電源電流：48μA\n\n? +2.5V至+5.5V單電源供電\n\n? 共模輸入電壓范圍擴展至供電軌以上250mV\n\n? 推挽輸出級的灌電流和拉電流為8mA (MAX987/MAX991/MAX995)\n\n? 開漏輸出電壓超出VCC (MAX988/MAX992/MAX996)\n\n? 專門設計的輸出級可降低輸出開關電流，從而充分降低總體功耗\n\n? 1MHz開關頻率下的電源電流為100μA\n\n? 過驅輸入無反相\n\n? 采用節省空間的封裝：\n? 5引腳SC70 (MAX987/MAX988)\n\n? 8引腳μMAX (MAX99;

ADI

亞德諾

Dual-Flash-Pin Electronics/Supervoltage Switch Matrix

General Description The MAX9960 dual-flash-pin electronics/supervoltage switch matrix replaces most of the relays and switches commonly needed to connect system resources to each of two pins in a flash memory or SOC ATE system (Figure 1). The device provides seven switches per channel to select u

文件：621.92 Kbytes 頁數：11 Pages

MAXIM

美信

Dual-Flash-Pin Electronics/Supervoltage Switch Matrix

General Description The MAX9960 dual-flash-pin electronics/supervoltage switch matrix replaces most of the relays and switches commonly needed to connect system resources to each of two pins in a flash memory or SOC ATE system (Figure 1). The device provides seven switches per channel to select u

文件：621.92 Kbytes 頁數：11 Pages

MAXIM

美信

Quad, Low-Power, 500Mbps ATE Driver/Comparator

General Description The MAX9963/MAX9964 four-channel, low-power, high speed pin electronics driver and comparator ICs include, for each channel, a three-level pin driver, a dual comparator, and variable clamps. The driver features a wide voltage range and high-speed operation, includes high-Z a

文件：744.08 Kbytes 頁數：25 Pages

MAXIM

美信

Quad, Low-Power, 500Mbps ATE Driver/Comparator

General Description The MAX9963/MAX9964 four-channel, low-power, high speed pin electronics driver and comparator ICs include, for each channel, a three-level pin driver, a dual comparator, and variable clamps. The driver features a wide voltage range and high-speed operation, includes high-Z a

文件：744.08 Kbytes 頁數：25 Pages

MAXIM

美信

Quad, Low-Power, 500Mbps ATE Driver/Comparator

General Description The MAX9963/MAX9964 four-channel, low-power, high speed pin electronics driver and comparator ICs include, for each channel, a three-level pin driver, a dual comparator, and variable clamps. The driver features a wide voltage range and high-speed operation, includes high-Z a

文件：744.08 Kbytes 頁數：25 Pages

MAXIM

美信