Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

General Description The MAX985/MAX986/MAX989/MAX990/MAX993/MAX994 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltages range from 2.5V to 5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：453.1 Kbytes 頁數：13 Pages

MAXIM

美信

Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators

文件：342.77 Kbytes 頁數：13 Pages

MAXIM

美信

Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators

文件：309.25 Kbytes 頁數：12 Pages

MAXIM

美信

微功耗、低電壓、UCSP/SC70封裝、滿擺幅輸入/輸出比較器

MAX985/MAX986/MAX989/MAX990/MAX993/MAX994單/雙/四微功耗比較器可低電壓工作，輸入輸出可達滿擺幅。工作電壓范圍為2.5V至5.5V，適用于采用3V和5V電源的系統。它們也可工作于±1.25V至±2.75V的雙電源下。電流消耗僅為11μA，傳輸延遲時間為300ns。\n\n 典型輸入偏置電流為1.0pA，典型輸入失調電壓為0.5mV。內部滯回可保證即使在慢輸入信號下也能實現干凈的輸出切換。\n\n 獨特的輸出級設計可以限制開關時的電源浪涌電流，從根本上消除了電源擾動(普遍存在于其他類型的比較器)。MAX985/MAX989/MAX993 ? 低靜態電流：11μA\n? 2.5V至5.5V單電源供電\n? 共模輸入電壓范圍可超出電源250mV\n? 300ns傳輸延遲\n? 推挽式輸出級吸收和源出電流能力達8mA (MAX985/MAX989/MAX993)\n? 開漏輸出電壓可超過VCC (MAX986/MAX990/MAX994)\n? 獨特的輸出級設計減小了輸出切換電流，降低了總功耗\n? 1MHz開關頻率時，電源電流80μA\n? 輸入過驅動時不發生輸出反相\n? 提供節省空間的封裝：\n? UCSP封裝(MAX985)\n? SOT23封裝(MAX985/MAX986/MAX989/MAX990)\n? μMAX?封裝;

ADI

亞德諾

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ?

文件：232.46 Kbytes 頁數：15 Pages

MAXIM

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ?

文件：232.46 Kbytes 頁數：15 Pages

MAXIM

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ?

文件：232.46 Kbytes 頁數：15 Pages

MAXIM

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ?

文件：232.46 Kbytes 頁數：15 Pages

MAXIM

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ?

文件：232.46 Kbytes 頁數：15 Pages

MAXIM

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ?

文件：232.46 Kbytes 頁數：15 Pages

MAXIM

美信