Ultra-Low-Power, Single-Supply Op Amp Comparator Reference

General Description The MAX951–MAX954 feature combinations of a micropower operational amplifier, comparator, and reference in an 8-pin package. In the MAX951 and MAX952, the comparator’s inverting input is connected to an internal 1.2V ±2 bandgap reference. The MAX953 and MAX954 are offered with

文件：114.27 Kbytes 頁數：12 Pages

MAXIM

美信

Ultra-Low-Power, Single-Supply Op Amp Comparator Reference

文件：1.99478 Mbytes 頁數：13 Pages

MAXIM

美信

超低功耗、單電源運算放大器+比較器+基準電壓源

MAX951–MAX954在8引腳封裝中集成了微功耗運算放大器、比較器和基準電壓源。在MAX951和MAX952中，比較器的反相輸入連接到1.2V±2%內部帶隙基準電壓源。MAX953和MAX954不帶內部基準電壓源。MAX951/MAX952采用2.7V至7V單電源供電，典型電源電流為7μA，而MAX953/MAX954采用2.4V至7V單電源供電，典型電源電流為5μA。運算放大器和比較器的共模輸入電壓范圍均從負供電軌擴展至正供電軌的1.6V范圍內，且支持軌到軌輸出級擺幅。\n\n MAX951/MAX953中的運算放大器經過內部補償，單位增益穩定，而MAX952/MAX9 ? 運算放大器+比較器+基準電壓源，采用8引腳μMAX?封裝(MAX951/MAX952)\n\n? 7μA典型電源電流（運算放大器+比較器+基準電壓源）\n\n? 比較器和運算放大器輸入范圍包括低電壓\n\n? 軌到軌輸出擺幅\n\n? 電源電壓范圍：2.4V至7V\n\n? 單位增益穩定和125kHz非完全補償AV> 10V/V運算放大器選項\n\n? 1.2V±2%內部帶隙基準電壓源\n\n? 內部比較器遲滯\n\n? 運算放大器能夠驅動高達1000pF的負載;

ADI

亞德諾

Graphics Video Sync Adder/Extractor

General Description The MAX9539/MAX9540 chipset provides a 3-wire (RGB) interface for 5-wire (RGBHV) video by adding and extracting the H, V, and composite sync from the graphics video signals. This chipset eliminates the problem of sync-to-video timing (skew errors) in a 5-wire interface, while

文件：216.85 Kbytes 頁數：15 Pages

MAXIM

美信

Graphics Video Sync Adder/Extractor

General Description The MAX9539/MAX9540 chipset provides a 3-wire (RGB) interface for 5-wire (RGBHV) video by adding and extracting the H, V, and composite sync from the graphics video signals. This chipset eliminates the problem of sync-to-video timing (skew errors) in a 5-wire interface, while

文件：216.85 Kbytes 頁數：15 Pages

MAXIM

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 頁數：16 Pages

MAXIM

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 頁數：16 Pages

MAXIM

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 頁數：16 Pages

MAXIM

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 頁數：16 Pages

MAXIM

美信

Differential Video Interface Chipset

General Description The MAX9546/MAX9547 differential interface chipset converts single-ended voltages to differential voltages for transport and then converts back to single-ended voltages. These devices eliminate costly, bulky, single-ended coaxial cables with inexpensive, readily available, dif

文件：251.5 Kbytes 頁數：12 Pages

MAXIM

美信